Re: [PATCH] thermal/drivers/hisi: Fix bad initialization

[Daniel Lezcano]

Sorry typo in Vincent's email address, fixed now.

On 29/11/2018 19:26, Daniel Lezcano wrote:
> Without this patch, the thermal driver on hi6220 and hi3660 is broken.
> 
> That is due because part of the posted patchset was merged but a small
> change in the DT was dropped.
> 
> The hi6220 and hi3660 do not have an interrupt name in the DT, so
> finding interrupt by name fails.
> 
> In addition, the hi3660 only defines one thermal zone in the DT and we
> are trying to register two sensors assuming we have two thermal zones
> in the DT.
> 
> Fix this by adding a couple of line of code to add back compatibility
> with older DT and change the sensors number to 1 for the hi3660.
> 
> Fixes: 2cffaeff083f (thermal/drivers/hisi: Use platform_get_irq_byname)
> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> ---
>  drivers/thermal/hisi_thermal.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
> index c4111a9..3ab0e63 100644
> --- a/drivers/thermal/hisi_thermal.c
> +++ b/drivers/thermal/hisi_thermal.c
> @@ -424,7 +424,7 @@ static int hi3660_thermal_probe(struct hisi_thermal_data *data)
>  	struct platform_device *pdev = data->pdev;
>  	struct device *dev = &pdev->dev;
>  
> -	data->nr_sensors = 2;
> +	data->nr_sensors = 1;
>  
>  	data->sensor = devm_kzalloc(dev, sizeof(*data->sensor) *
>  				    data->nr_sensors, GFP_KERNEL);
> @@ -590,8 +590,13 @@ static int hisi_thermal_probe(struct platform_device *pdev)
>  		}
>  
>  		ret = platform_get_irq_byname(pdev, sensor->irq_name);
> -		if (ret < 0)
> -			return ret;
> +		if (ret <= 0) {
> +			ret = platform_get_irq(pdev, 0);
> +			if (ret <=  0) {
> +				dev_err(dev, "Failed get interrupt: %d\n", ret);
> +				return ret;
> +			}
> +		}
>  
>  		ret = devm_request_threaded_irq(dev, ret, NULL,
>  						hisi_thermal_alarm_irq_thread,
> 


-- 
 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog