Re: [PATCH 2/5] i2c: mediatek: remove useless code and replace definitions

[Wolfram Sang]

On Mon, Dec 03, 2018 at 09:32:51PM +0800, qii.wang@xxxxxxxxxxxx wrote:
> From: qii wang <qii.wang@xxxxxxxxxxxx>
> 
> Completion_done is useless when we don't use its return value,
> so we remove it. Different speeds have been defined by macros,
> so we use macros definitions.

Those are two seperate patches, or?

> 
> Signed-off-by: qii wang <qii.wang@xxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-mt65xx.c |    6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index a74ef76..660de1e 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -456,7 +456,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>  
>  	control_reg = readw(i2c->base + OFFSET_CONTROL) &
>  			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
> -	if ((i2c->speed_hz > 400000) || (left_num >= 1))
> +	if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1))
>  		control_reg |= I2C_CONTROL_RS;
>  
>  	if (i2c->op == I2C_MASTER_WRRD)
> @@ -465,7 +465,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>  	writew(control_reg, i2c->base + OFFSET_CONTROL);
>  
>  	/* set start condition */
> -	if (i2c->speed_hz <= 100000)
> +	if (i2c->speed_hz <= I2C_DEFAULT_SPEED)
>  		writew(I2C_ST_START_CON, i2c->base + OFFSET_EXT_CONF);
>  	else
>  		writew(I2C_FS_START_CON, i2c->base + OFFSET_EXT_CONF);
> @@ -642,8 +642,6 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>  		return -ETIMEDOUT;
>  	}
>  
> -	completion_done(&i2c->msg_complete);
> -
>  	if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
>  		dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr);
>  		mtk_i2c_init_hw(i2c);
> -- 
> 1.7.9.5
>

Attachment: signature.asc
Description: PGP signature