Re: [PATCH v1 03/13] powerpc/mm/32s: rework mmu_mapin_ram()

[Christophe Leroy]

Hi,

On 12/03/2018 09:55 PM, Jonathan NeuschÃfer wrote:
> Hi,
>
> On Thu, Nov 29, 2018 at 07:00:16PM +0000, Christophe Leroy wrote:
> > This patch reworks mmu_mapin_ram() to be more generic and map as much
> > blocks as possible. It now supports blocks not starting at address 0.
> >
> > It scans DBATs array to find free ones instead of forcing the use of
> > BAT2 and BAT3.
> >
> > Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
> > ---
>
> I've just tested this series on my Wii, and starting from this patch
> (03/13), it hangs at the following lines of output:
>
> [    0.000000] printk: bootconsole [udbg0] enabled
> [    0.000000] Total memory = 319MB; using 1024kB for hash table (at (ptrval))
>
> Before this patch it looks like this and boots to userspace:
>
> [    0.000000] printk: bootconsole [udbg0] enabled
> [    0.000000] Total memory = 319MB; using 1024kB for hash table (at (ptrval))
> [    0.000000] Linux version 4.20.0-rc5-wii-00022-gfbb911b84755 (jn@longitude) (gcc version 8.2.0 (Debian 8.2.0-9)) #1337 PREEMPT Mon Dec 3 21:49:02 CET 2018
> ug_udbg_init: early -> final
> usbgecko_udbg: ready
> [    0.000000] Using wii machine description

Can you tell/provide the .config and dts used ?

You seem to have 319MB RAM wherease arch/powerpc/boot/dts/wii.dts only 
has 88MB Memory:

	memory {
		device_type = "memory";
		reg = <0x00000000 0x01800000	/* MEM1 24MB 1T-SRAM */
		       0x10000000 0x04000000>;	/* MEM2 64MB GDDR3 */
	};

Christophe

> ...
>
> I've tested at patch 1, 2, 3, 4, and 13, so I don't know if it works
> somewhere in the middle, but probably not.
>
> (And in case you're wondering about the 22 in the version string: Those
> are mostly patches that give me a serial console.)
>
> I'm not sure what is going on, because I haven't looked closely at the
> patches or tried to debug the problem. If you have some debugging tips,
> I can try them.
>
>
> Jonathan NeuschÃfer