Re: [PATCH v7 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
From: Lorenzo Pieralisi
Date: Thu Dec 13 2018 - 11:34:32 EST
On Thu, Dec 06, 2018 at 08:02:38PM +0800, Hanjie Lin wrote:
> From: Yue Wang <yue.wang@xxxxxxxxxxx>
>
> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
> PCI core. This patch adds the driver support for Meson PCIe controller.
>
> Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
> Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
> ---
> MAINTAINERS | 7 +
> drivers/pci/controller/dwc/Kconfig | 10 +
> drivers/pci/controller/dwc/Makefile | 1 +
> drivers/pci/controller/dwc/pci-meson.c | 603 +++++++++++++++++++++++++++++++++
> 4 files changed, 621 insertions(+)
> create mode 100644 drivers/pci/controller/dwc/pci-meson.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7fe120f..21ed916 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11600,6 +11600,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
> S: Supported
> F: drivers/pci/controller/
>
> +PCIE DRIVER FOR AMLOGIC MESON
> +M: Yue Wang <yue.wang@xxxxxxxxxxx>
> +L: linux-pci@xxxxxxxxxxxxxxx
> +L: linux-amlogic@xxxxxxxxxxxxxxxxxxx
> +S: Maintained
> +F: drivers/pci/controller/dwc/pci-meson.c
> +
> PCIE DRIVER FOR AXIS ARTPEC
> M: Jesper Nilsson <jesper.nilsson@xxxxxxxx>
> L: linux-arm-kernel@xxxxxxxx
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 91b0194..7800322 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -193,4 +193,14 @@ config PCIE_HISI_STB
> help
> Say Y here if you want PCIe controller support on HiSilicon STB SoCs
>
> +config PCI_MESON
> + bool "MESON PCIe controller"
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIE_DW_HOST
> + help
> + Say Y here if you want to enable PCI controller support on Amlogic
> + SoCs. The PCI controller on Amlogic is based on DesignWare hardware
> + and therefore the driver re-uses the DesignWare core functions to
> + implement the driver.
> +
> endmenu
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index fcf91ea..e05a015 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
> obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
> +obj-$(CONFIG_PCI_MESON) += pci-meson.o
>
> # The following drivers are for devices that use the generic ACPI
> # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> new file mode 100644
> index 0000000..428ed42
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pci-meson.c
> @@ -0,0 +1,603 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe host controller driver for Amlogic MESON SoCs
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Yue Wang <yue.wang@xxxxxxxxxxx>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +#include <linux/types.h>
> +#include <linux/reset.h>
Alphabetical order.
> +#include "pcie-designware.h"
> +
> +#define to_meson_pcie(x) dev_get_drvdata((x)->dev)
> +
> +/* External local bus interface registers */
> +#define PLR_OFFSET 0x700
> +#define PCIE_PORT_LINK_CTRL_OFF (PLR_OFFSET + 0x10)
> +#define FAST_LINK_MODE BIT(7)
> +#define LINK_CAPABLE_MASK GENMASK(21, 16)
> +#define LINK_CAPABLE_X1 BIT(16)
> +
> +#define PCIE_GEN2_CTRL_OFF (PLR_OFFSET + 0x10c)
> +#define NUM_OF_LANES_MASK GENMASK(12, 8)
> +#define NUM_OF_LANES_X1 BIT(8)
> +#define DIRECT_SPEED_CHANGE BIT(17)
> +
> +#define TYPE1_HDR_OFFSET 0x0
> +#define PCIE_STATUS_COMMAND (TYPE1_HDR_OFFSET + 0x04)
> +#define PCI_IO_EN BIT(0)
> +#define PCI_MEM_SPACE_EN BIT(1)
> +#define PCI_BUS_MASTER_EN BIT(2)
> +
> +#define PCIE_BASE_ADDR0 (TYPE1_HDR_OFFSET + 0x10)
> +#define PCIE_BASE_ADDR1 (TYPE1_HDR_OFFSET + 0x14)
> +
> +#define PCIE_CAP_OFFSET 0x70
> +#define PCIE_DEV_CTRL_DEV_STUS (PCIE_CAP_OFFSET + 0x08)
> +#define PCIE_CAP_MAX_PAYLOAD_MASK GENMASK(7, 5)
> +#define PCIE_CAP_MAX_PAYLOAD_SIZE(x) ((x) << 5)
> +#define PCIE_CAP_MAX_READ_REQ_MASK GENMASK(14, 12)
> +#define PCIE_CAP_MAX_READ_REQ_SIZE(x) ((x) << 12)
> +
> +#define PCI_CLASS_REVISION_MASK GENMASK(7, 0)
Unused.
> +/* PCIe specific config registers */
> +#define PCIE_CFG0 0x0
> +#define APP_LTSSM_ENABLE BIT(7)
> +
> +#define PCIE_CFG_STATUS12 0x30
> +#define IS_SMLH_LINK_UP(x) ((x) & (1 << 6))
> +#define IS_RDLH_LINK_UP(x) ((x) & (1 << 16))
> +#define IS_LTSSM_UP(x) ((((x) >> 10) & 0x1f) == 0x11)
> +
> +#define PCIE_CFG_STATUS17 0x44
> +#define PM_CURRENT_STATE(x) (((x) >> 7) & 0x1)
> +
> +#define WAIT_LINKUP_TIMEOUT 2000
> +#define PORT_CLK_RATE 100000000UL
> +#define MAX_PAYLOAD_SIZE 256
> +#define MAX_READ_REQ_SIZE 256
> +#define MESON_PCIE_PHY_POWERUP 0x1c
> +#define PCIE_RESET_DELAY 500
> +#define PCIE_SHARED_RESET 1
> +#define PCIE_NORMAL_RESET 0
> +
> +enum pcie_data_rate {
> + PCIE_GEN1,
> + PCIE_GEN2,
> + PCIE_GEN3,
> + PCIE_GEN4
> +};
> +
> +struct meson_pcie_mem_res {
> + void __iomem *elbi_base;
> + void __iomem *cfg_base;
> + void __iomem *phy_base;
> +};
> +
> +struct meson_pcie_clk_res {
> + struct clk *clk;
> + struct clk *mipi_gate;
> + struct clk *port_clk;
> + struct clk *general_clk;
> +};
> +
> +struct meson_pcie_rc_reset {
> + struct reset_control *phy;
> + struct reset_control *port;
> + struct reset_control *apb;
> +};
> +
> +struct meson_pcie {
> + struct dw_pcie pci;
> + struct meson_pcie_mem_res mem_res;
> + struct meson_pcie_clk_res clk_res;
> + struct meson_pcie_rc_reset mrst;
> + struct gpio_desc *reset_gpio;
> +
> + enum of_gpio_flags gpio_flag;
Unused.
> + int pcie_num;
Unused.
> + u32 port_num;
Unused.
Please check these details before resubmitting.
> +};
> +
> +static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
> + const char *id,
> + u32 reset_type)
> +{
> + struct device *dev = mp->pci.dev;
> + struct reset_control *reset;
> +
> + if (reset_type == PCIE_SHARED_RESET)
> + reset = devm_reset_control_get_shared(dev, id);
> + else
> + reset = devm_reset_control_get(dev, id);
> +
> + return reset;
> +}
> +
> +static int meson_pcie_get_resets(struct meson_pcie *mp)
> +{
> + struct meson_pcie_rc_reset *mrst = &mp->mrst;
> +
> + mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
> + if (IS_ERR(mrst->phy))
> + return PTR_ERR(mrst->phy);
> + reset_control_deassert(mrst->phy);
> +
> + mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
> + if (IS_ERR(mrst->port))
> + return PTR_ERR(mrst->port);
> + reset_control_deassert(mrst->port);
> +
> + mrst->apb = meson_pcie_get_reset(mp, "apb", PCIE_SHARED_RESET);
> + if (IS_ERR(mrst->apb))
> + return PTR_ERR(mrst->apb);
> + reset_control_deassert(mrst->apb);
> +
> + return 0;
> +}
> +
> +static void __iomem *meson_pcie_get_mem(struct platform_device *pdev,
> + struct meson_pcie *mp,
> + const char *id)
> +{
> + struct device *dev = mp->pci.dev;
> + struct resource *res;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
> +
> + return devm_ioremap_resource(dev, res);
> +}
> +
> +static void __iomem *meson_pcie_get_mem_shared(struct platform_device *pdev,
> + struct meson_pcie *mp,
> + const char *id)
> +{
> + struct device *dev = mp->pci.dev;
> + struct resource *res;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
> + if (!res) {
> + dev_err(dev, "No REG resource %s\n", id);
> + return ERR_PTR(-ENXIO);
> + }
> +
> + return devm_ioremap(dev, res->start, resource_size(res));
> +}
> +
> +static int meson_pcie_get_mems(struct platform_device *pdev,
> + struct meson_pcie *mp)
> +{
> + mp->mem_res.elbi_base = meson_pcie_get_mem(pdev, mp, "elbi");
> + if (IS_ERR(mp->mem_res.elbi_base))
> + return PTR_ERR(mp->mem_res.elbi_base);
> +
> + mp->mem_res.cfg_base = meson_pcie_get_mem(pdev, mp, "cfg");
> + if (IS_ERR(mp->mem_res.cfg_base))
> + return PTR_ERR(mp->mem_res.cfg_base);
> +
> + /* Meson SoC has two PCI controllers use same phy register*/
> + mp->mem_res.phy_base = meson_pcie_get_mem_shared(pdev, mp, "phy");
> + if (IS_ERR(mp->mem_res.phy_base))
> + return PTR_ERR(mp->mem_res.phy_base);
> +
> + return 0;
> +}
> +
> +static void meson_pcie_power_on(struct meson_pcie *mp)
> +{
> + writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
> +}
> +
> +static void meson_pcie_reset(struct meson_pcie *mp)
> +{
> + struct meson_pcie_rc_reset *mrst = &mp->mrst;
> +
> + reset_control_assert(mrst->phy);
> + udelay(PCIE_RESET_DELAY);
> + reset_control_deassert(mrst->phy);
> + udelay(PCIE_RESET_DELAY);
> +
> + reset_control_assert(mrst->port);
> + reset_control_assert(mrst->apb);
> + udelay(PCIE_RESET_DELAY);
> + reset_control_deassert(mrst->port);
> + reset_control_deassert(mrst->apb);
> + udelay(PCIE_RESET_DELAY);
> +}
> +
> +static inline struct clk *meson_pcie_probe_clock(struct device *dev,
> + const char *id, u64 rate)
> +{
> + struct clk *clk;
> + int ret;
> +
> + clk = devm_clk_get(dev, id);
> + if (IS_ERR(clk))
> + return clk;
> +
> + if (rate) {
> + ret = clk_set_rate(clk, rate);
> + if (ret) {
> + dev_err(dev, "set clk rate failed, ret = %d\n", ret);
> + return ERR_PTR(ret);
> + }
> + }
> +
> + ret = clk_prepare_enable(clk);
> + if (ret) {
> + dev_err(dev, "couldn't enable clk\n");
> + return ERR_PTR(ret);
> + }
> +
> + devm_add_action_or_reset(dev,
> + (void (*) (void *))clk_disable_unprepare,
> + clk);
> +
> + return clk;
> +}
> +
> +static int meson_pcie_probe_clocks(struct meson_pcie *mp)
> +{
> + struct device *dev = mp->pci.dev;
> + struct meson_pcie_clk_res *res = &mp->clk_res;
> +
> + res->port_clk = meson_pcie_probe_clock(dev, "port", PORT_CLK_RATE);
> + if (IS_ERR(res->port_clk))
> + return PTR_ERR(res->port_clk);
> +
> + res->mipi_gate = meson_pcie_probe_clock(dev, "pcie_mipi_en", 0);
> + if (IS_ERR(res->mipi_gate))
> + return PTR_ERR(res->mipi_gate);
> +
> + res->general_clk = meson_pcie_probe_clock(dev, "pcie_general", 0);
> + if (IS_ERR(res->general_clk))
> + return PTR_ERR(res->general_clk);
> +
> + res->clk = meson_pcie_probe_clock(dev, "pcie", 0);
> + if (IS_ERR(res->clk))
> + return PTR_ERR(res->clk);
> +
> + return 0;
> +}
> +
> +static inline void meson_elb_writel(struct meson_pcie *mp, u32 val, u32 reg)
> +{
> + writel(val, mp->mem_res.elbi_base + reg);
> +}
> +
> +static inline u32 meson_elb_readl(struct meson_pcie *mp, u32 reg)
> +{
> + return readl(mp->mem_res.elbi_base + reg);
> +}
> +
> +static inline u32 meson_cfg_readl(struct meson_pcie *mp, u32 reg)
> +{
> + return readl(mp->mem_res.cfg_base + reg);
> +}
> +
> +static inline void meson_cfg_writel(struct meson_pcie *mp, u32 val, u32 reg)
> +{
> + writel(val, mp->mem_res.cfg_base + reg);
> +}
> +
> +static void meson_pcie_assert_reset(struct meson_pcie *mp)
> +{
> + gpiod_set_value_cansleep(mp->reset_gpio, 0);
> + udelay(500);
> + gpiod_set_value_cansleep(mp->reset_gpio, 1);
> +}
> +
> +static void meson_pcie_init_dw(struct meson_pcie *mp)
> +{
> + u32 val;
> +
> + val = meson_cfg_readl(mp, PCIE_CFG0);
> + val |= APP_LTSSM_ENABLE;
> + meson_cfg_writel(mp, val, PCIE_CFG0);
> +
> + val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
> + val &= ~LINK_CAPABLE_MASK;
> + meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
> +
> + val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
> + val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
> + meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
> +
> + val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
> + val &= ~NUM_OF_LANES_MASK;
> + meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
> +
> + val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
> + val |= NUM_OF_LANES_X1 | DIRECT_SPEED_CHANGE;
> + meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
> +
> + meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR0);
> + meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR1);
> +}
> +
> +static int meson_size_to_payload(struct meson_pcie *mp, int size)
> +{
> + struct device *dev = mp->pci.dev;
> +
> + /*
> + * dwc supports 2^(val+7) payload size, which val is 0~5 default to 1.
> + * So if input size is not 2^order alignment or less than 2^7 or bigger
> + * than 2^12, just set to default size 2^(1+7).
> + */
> + if (!is_power_of_2(size) || size < 128 || size > 4096) {
> + dev_warn(dev, "playload size %d, set to default 256\n", size);
> + return 1;
> + }
> +
> + return fls(size) - 8;
> +}
> +
> +static void meson_set_max_payload(struct meson_pcie *mp, int size)
> +{
> + u32 val = 0;
> + int max_payload_size = meson_size_to_payload(mp, size);
> +
> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
> + val &= ~PCIE_CAP_MAX_PAYLOAD_MASK;
> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
> +
> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
> + val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
> +}
> +
> +static void meson_set_max_rd_req_size(struct meson_pcie *mp, int size)
> +{
> + u32 val;
> + int max_rd_req_size = meson_size_to_payload(mp, size);
> +
> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
> + val &= ~PCIE_CAP_MAX_READ_REQ_MASK;
> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
> +
> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
> + val |= PCIE_CAP_MAX_READ_REQ_SIZE(max_rd_req_size);
> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
> +}
> +
> +static inline void meson_enable_memory_space(struct meson_pcie *mp)
> +{
> + /* Set the RC Bus Master, Memory Space and I/O Space enables */
> + meson_elb_writel(mp, PCI_IO_EN | PCI_MEM_SPACE_EN | PCI_BUS_MASTER_EN,
> + PCIE_STATUS_COMMAND);
> +}
> +
> +static int meson_pcie_establish_link(struct meson_pcie *mp)
> +{
> + struct dw_pcie *pci = &mp->pci;
> + struct pcie_port *pp = &pci->pp;
> +
> + meson_pcie_init_dw(mp);
> + meson_set_max_payload(mp, MAX_PAYLOAD_SIZE);
> + meson_set_max_rd_req_size(mp, MAX_READ_REQ_SIZE);
> +
> + dw_pcie_setup_rc(pp);
> + meson_enable_memory_space(mp);
> +
> + meson_pcie_assert_reset(mp);
> +
> + return dw_pcie_wait_for_link(pci);
> +}
> +
> +static void meson_pcie_enable_interrupts(struct meson_pcie *mp)
> +{
> + if (IS_ENABLED(CONFIG_PCI_MSI))
> + dw_pcie_msi_init(&mp->pci.pp);
> +}
> +
> +static int meson_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
> + u32 *val)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + int ret;
> +
> + ret = dw_pcie_read(pci->dbi_base + where, size, val);
> + if (ret != PCIBIOS_SUCCESSFUL)
> + return ret;
> +
> + /*
> + * There is a bug in the MESON AXG pcie controller whereby software
> + * cannot programme the PCI_CLASS_DEVICE register, so we must fabricate
> + * the return value in the config accessors.
> + */
> + if (where == PCI_CLASS_REVISION && size == 4)
> + *val = (PCI_CLASS_BRIDGE_PCI << 16) | (*val & 0xffff);
> + else if (where == PCI_CLASS_DEVICE && size == 2)
> + *val = PCI_CLASS_BRIDGE_PCI;
> + else if (where == PCI_CLASS_DEVICE && size == 1)
> + *val = PCI_CLASS_BRIDGE_PCI & 0xff;
> + else if (where == PCI_CLASS_DEVICE + 1 && size == 1)
> + *val = (PCI_CLASS_BRIDGE_PCI >> 8) & 0xff;
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int meson_pcie_wr_own_conf(struct pcie_port *pp, int where,
> + int size, u32 val)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +
> + return dw_pcie_write(pci->dbi_base + where, size, val);
> +}
> +
> +static int meson_pcie_link_up(struct dw_pcie *pci)
> +{
> + struct meson_pcie *mp = to_meson_pcie(pci);
> + struct device *dev = pci->dev;
> + u32 smlh_up = 0;
> + u32 ltssm_up = 0;
> + u32 rdlh_up = 0;
> + u32 speed_okay = 0;
> + u32 cnt = 0;
> + u32 state12, state17;
> +
Nit: a
do {
} while (...)
makes more sense given the variables you are checking.
Lorenzo
> + while (smlh_up == 0 || rdlh_up == 0 || ltssm_up == 0 ||
> + speed_okay == 0) {
> + udelay(20);
> +
> + state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12);
> + state17 = meson_cfg_readl(mp, PCIE_CFG_STATUS17);
> + smlh_up = IS_SMLH_LINK_UP(state12);
> + rdlh_up = IS_RDLH_LINK_UP(state12);
> + ltssm_up = IS_LTSSM_UP(state12);
> +
> + if (PM_CURRENT_STATE(state17) < PCIE_GEN3)
> + speed_okay = 1;
> +
> + if (smlh_up)
> + dev_dbg(dev, "smlh_link_up is on\n");
> + if (rdlh_up)
> + dev_dbg(dev, "rdlh_link_up is on\n");
> + if (ltssm_up)
> + dev_dbg(dev, "ltssm_up is on\n");
> + if (speed_okay)
> + dev_dbg(dev, "speed_okay\n");
> +
> + cnt++;
> +
> + if (cnt >= WAIT_LINKUP_TIMEOUT) {
> + dev_err(dev, "Error: Wait linkup timeout.\n");
> + return 0;
> + }
> + }
> +
> + return 1;
> +}
> +
> +static int meson_pcie_host_init(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct meson_pcie *mp = to_meson_pcie(pci);
> + int ret;
> +
> + ret = meson_pcie_establish_link(mp);
> + if (ret)
> + return ret;
> +
> + meson_pcie_enable_interrupts(mp);
> +
> + return 0;
> +}
> +
> +static const struct dw_pcie_host_ops meson_pcie_host_ops = {
> + .rd_own_conf = meson_pcie_rd_own_conf,
> + .wr_own_conf = meson_pcie_wr_own_conf,
> + .host_init = meson_pcie_host_init,
> +};
> +
> +static int meson_add_pcie_port(struct meson_pcie *mp,
> + struct platform_device *pdev)
> +{
> + struct dw_pcie *pci = &mp->pci;
> + struct pcie_port *pp = &pci->pp;
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
> + pp->msi_irq = platform_get_irq(pdev, 0);
> + if (pp->msi_irq < 0) {
> + dev_err(dev, "failed to get msi irq\n");
> + return pp->msi_irq;
> + }
> + }
> +
> + pp->ops = &meson_pcie_host_ops;
> + pci->dbi_base = mp->mem_res.elbi_base;
> +
> + ret = dw_pcie_host_init(pp);
> + if (ret) {
> + dev_err(dev, "failed to initialize host\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct dw_pcie_ops dw_pcie_ops = {
> + .link_up = meson_pcie_link_up,
> +};
> +
> +static int meson_pcie_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct dw_pcie *pci;
> + struct meson_pcie *mp;
> + int ret;
> +
> + mp = devm_kzalloc(dev, sizeof(*mp), GFP_KERNEL);
> + if (!mp)
> + return -ENOMEM;
> +
> + pci = &mp->pci;
> + pci->dev = dev;
> + pci->ops = &dw_pcie_ops;
> +
> + mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(mp->reset_gpio)) {
> + dev_err(dev, "Get reset gpio failed\n");
> + return PTR_ERR(mp->reset_gpio);
> + }
> +
> + ret = meson_pcie_get_resets(mp);
> + if (ret) {
> + dev_err(dev, "Get reset resource failed, %d\n", ret);
> + return ret;
> + }
> +
> + ret = meson_pcie_get_mems(pdev, mp);
> + if (ret) {
> + dev_err(dev, "Get memory resource failed, %d\n", ret);
> + return ret;
> + }
> +
> + meson_pcie_power_on(mp);
> + meson_pcie_reset(mp);
> +
> + ret = meson_pcie_probe_clocks(mp);
> + if (ret) {
> + dev_err(dev, "Init clock resources failed, %d\n", ret);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, mp);
> +
> + ret = meson_add_pcie_port(mp, pdev);
> + if (ret < 0) {
> + dev_err(dev, "Add PCIE port failed, %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_pcie_of_match[] = {
> + {
> + .compatible = "amlogic,axg-pcie",
> + },
> + {},
> +};
> +
> +static struct platform_driver meson_pcie_driver = {
> + .probe = meson_pcie_probe,
> + .driver = {
> + .name = "meson-pcie",
> + .of_match_table = meson_pcie_of_match,
> + },
> +};
> +
> +builtin_platform_driver(meson_pcie_driver);
> --
> 2.7.4
>