Re: [PATCH v7 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
From: Hanjie Lin
Date: Fri Dec 14 2018 - 06:02:44 EST
On 2018/12/14 0:34, Lorenzo Pieralisi wrote:
> On Thu, Dec 06, 2018 at 08:02:38PM +0800, Hanjie Lin wrote:
>> From: Yue Wang <yue.wang@xxxxxxxxxxx>
>>
>> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
>> PCI core. This patch adds the driver support for Meson PCIe controller.
>>
>> Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
>> Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
>> ---
>> MAINTAINERS | 7 +
>> drivers/pci/controller/dwc/Kconfig | 10 +
>> drivers/pci/controller/dwc/Makefile | 1 +
>> drivers/pci/controller/dwc/pci-meson.c | 603 +++++++++++++++++++++++++++++++++
>> 4 files changed, 621 insertions(+)
>> create mode 100644 drivers/pci/controller/dwc/pci-meson.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 7fe120f..21ed916 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -11600,6 +11600,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
>> S: Supported
>> F: drivers/pci/controller/
>>
>> +PCIE DRIVER FOR AMLOGIC MESON
>> +M: Yue Wang <yue.wang@xxxxxxxxxxx>
>> +L: linux-pci@xxxxxxxxxxxxxxx
>> +L: linux-amlogic@xxxxxxxxxxxxxxxxxxx
>> +S: Maintained
>> +F: drivers/pci/controller/dwc/pci-meson.c
>> +
>> PCIE DRIVER FOR AXIS ARTPEC
>> M: Jesper Nilsson <jesper.nilsson@xxxxxxxx>
>> L: linux-arm-kernel@xxxxxxxx
>> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
>> index 91b0194..7800322 100644
>> --- a/drivers/pci/controller/dwc/Kconfig
>> +++ b/drivers/pci/controller/dwc/Kconfig
>> @@ -193,4 +193,14 @@ config PCIE_HISI_STB
>> help
>> Say Y here if you want PCIe controller support on HiSilicon STB SoCs
>>
>> +config PCI_MESON
>> + bool "MESON PCIe controller"
>> + depends on PCI_MSI_IRQ_DOMAIN
>> + select PCIE_DW_HOST
>> + help
>> + Say Y here if you want to enable PCI controller support on Amlogic
>> + SoCs. The PCI controller on Amlogic is based on DesignWare hardware
>> + and therefore the driver re-uses the DesignWare core functions to
>> + implement the driver.
>> +
>> endmenu
>> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
>> index fcf91ea..e05a015 100644
>> --- a/drivers/pci/controller/dwc/Makefile
>> +++ b/drivers/pci/controller/dwc/Makefile
>> @@ -14,6 +14,7 @@ obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>> obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
>> obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
>> obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
>> +obj-$(CONFIG_PCI_MESON) += pci-meson.o
>>
>> # The following drivers are for devices that use the generic ACPI
>> # pci_root.c driver but don't support standard ECAM config access.
>> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
>> new file mode 100644
>> index 0000000..428ed42
>> --- /dev/null
>> +++ b/drivers/pci/controller/dwc/pci-meson.c
>> @@ -0,0 +1,603 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PCIe host controller driver for Amlogic MESON SoCs
>> + *
>> + * Copyright (c) 2018 Amlogic, inc.
>> + * Author: Yue Wang <yue.wang@xxxxxxxxxxx>
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/resource.h>
>> +#include <linux/types.h>
>> +#include <linux/reset.h>
>
> Alphabetical order.
>
ok, I will modify and pay attention to this later.
>> +#include "pcie-designware.h"
>> +
>> +#define to_meson_pcie(x) dev_get_drvdata((x)->dev)
>> +
>> +/* External local bus interface registers */
>> +#define PLR_OFFSET 0x700
>> +#define PCIE_PORT_LINK_CTRL_OFF (PLR_OFFSET + 0x10)
>> +#define FAST_LINK_MODE BIT(7)
>> +#define LINK_CAPABLE_MASK GENMASK(21, 16)
>> +#define LINK_CAPABLE_X1 BIT(16)
>> +
>> +#define PCIE_GEN2_CTRL_OFF (PLR_OFFSET + 0x10c)
>> +#define NUM_OF_LANES_MASK GENMASK(12, 8)
>> +#define NUM_OF_LANES_X1 BIT(8)
>> +#define DIRECT_SPEED_CHANGE BIT(17)
>> +
>> +#define TYPE1_HDR_OFFSET 0x0
>> +#define PCIE_STATUS_COMMAND (TYPE1_HDR_OFFSET + 0x04)
>> +#define PCI_IO_EN BIT(0)
>> +#define PCI_MEM_SPACE_EN BIT(1)
>> +#define PCI_BUS_MASTER_EN BIT(2)
>> +
>> +#define PCIE_BASE_ADDR0 (TYPE1_HDR_OFFSET + 0x10)
>> +#define PCIE_BASE_ADDR1 (TYPE1_HDR_OFFSET + 0x14)
>> +
>> +#define PCIE_CAP_OFFSET 0x70
>> +#define PCIE_DEV_CTRL_DEV_STUS (PCIE_CAP_OFFSET + 0x08)
>> +#define PCIE_CAP_MAX_PAYLOAD_MASK GENMASK(7, 5)
>> +#define PCIE_CAP_MAX_PAYLOAD_SIZE(x) ((x) << 5)
>> +#define PCIE_CAP_MAX_READ_REQ_MASK GENMASK(14, 12)
>> +#define PCIE_CAP_MAX_READ_REQ_SIZE(x) ((x) << 12)
>> +
>> +#define PCI_CLASS_REVISION_MASK GENMASK(7, 0)
>
> Unused.
>
>> +/* PCIe specific config registers */
>> +#define PCIE_CFG0 0x0
>> +#define APP_LTSSM_ENABLE BIT(7)
>> +
>> +#define PCIE_CFG_STATUS12 0x30
>> +#define IS_SMLH_LINK_UP(x) ((x) & (1 << 6))
>> +#define IS_RDLH_LINK_UP(x) ((x) & (1 << 16))
>> +#define IS_LTSSM_UP(x) ((((x) >> 10) & 0x1f) == 0x11)
>> +
>> +#define PCIE_CFG_STATUS17 0x44
>> +#define PM_CURRENT_STATE(x) (((x) >> 7) & 0x1)
>> +
>> +#define WAIT_LINKUP_TIMEOUT 2000
>> +#define PORT_CLK_RATE 100000000UL
>> +#define MAX_PAYLOAD_SIZE 256
>> +#define MAX_READ_REQ_SIZE 256
>> +#define MESON_PCIE_PHY_POWERUP 0x1c
>> +#define PCIE_RESET_DELAY 500
>> +#define PCIE_SHARED_RESET 1
>> +#define PCIE_NORMAL_RESET 0
>> +
>> +enum pcie_data_rate {
>> + PCIE_GEN1,
>> + PCIE_GEN2,
>> + PCIE_GEN3,
>> + PCIE_GEN4
>> +};
>> +
>> +struct meson_pcie_mem_res {
>> + void __iomem *elbi_base;
>> + void __iomem *cfg_base;
>> + void __iomem *phy_base;
>> +};
>> +
>> +struct meson_pcie_clk_res {
>> + struct clk *clk;
>> + struct clk *mipi_gate;
>> + struct clk *port_clk;
>> + struct clk *general_clk;
>> +};
>> +
>> +struct meson_pcie_rc_reset {
>> + struct reset_control *phy;
>> + struct reset_control *port;
>> + struct reset_control *apb;
>> +};
>> +
>> +struct meson_pcie {
>> + struct dw_pcie pci;
>> + struct meson_pcie_mem_res mem_res;
>> + struct meson_pcie_clk_res clk_res;
>> + struct meson_pcie_rc_reset mrst;
>> + struct gpio_desc *reset_gpio;
>> +
>> + enum of_gpio_flags gpio_flag;
>
> Unused.
>
>> + int pcie_num;
>
> Unused.
>
>> + u32 port_num;
>
> Unused.
>
> Please check these details before resubmitting.
>
ok, I will correct these and re-check all code again.
>> +};
>> +
>> +static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
>> + const char *id,
>> + u32 reset_type)
>> +{
>> + struct device *dev = mp->pci.dev;
>> + struct reset_control *reset;
>> +
>> + if (reset_type == PCIE_SHARED_RESET)
>> + reset = devm_reset_control_get_shared(dev, id);
>> + else
>> + reset = devm_reset_control_get(dev, id);
>> +
>> + return reset;
>> +}
>> +
>> +static int meson_pcie_get_resets(struct meson_pcie *mp)
>> +{
>> + struct meson_pcie_rc_reset *mrst = &mp->mrst;
>> +
>> + mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
>> + if (IS_ERR(mrst->phy))
>> + return PTR_ERR(mrst->phy);
>> + reset_control_deassert(mrst->phy);
>> +
>> + mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
>> + if (IS_ERR(mrst->port))
>> + return PTR_ERR(mrst->port);
>> + reset_control_deassert(mrst->port);
>> +
>> + mrst->apb = meson_pcie_get_reset(mp, "apb", PCIE_SHARED_RESET);
>> + if (IS_ERR(mrst->apb))
>> + return PTR_ERR(mrst->apb);
>> + reset_control_deassert(mrst->apb);
>> +
>> + return 0;
>> +}
>> +
>> +static void __iomem *meson_pcie_get_mem(struct platform_device *pdev,
>> + struct meson_pcie *mp,
>> + const char *id)
>> +{
>> + struct device *dev = mp->pci.dev;
>> + struct resource *res;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
>> +
>> + return devm_ioremap_resource(dev, res);
>> +}
>> +
>> +static void __iomem *meson_pcie_get_mem_shared(struct platform_device *pdev,
>> + struct meson_pcie *mp,
>> + const char *id)
>> +{
>> + struct device *dev = mp->pci.dev;
>> + struct resource *res;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
>> + if (!res) {
>> + dev_err(dev, "No REG resource %s\n", id);
>> + return ERR_PTR(-ENXIO);
>> + }
>> +
>> + return devm_ioremap(dev, res->start, resource_size(res));
>> +}
>> +
>> +static int meson_pcie_get_mems(struct platform_device *pdev,
>> + struct meson_pcie *mp)
>> +{
>> + mp->mem_res.elbi_base = meson_pcie_get_mem(pdev, mp, "elbi");
>> + if (IS_ERR(mp->mem_res.elbi_base))
>> + return PTR_ERR(mp->mem_res.elbi_base);
>> +
>> + mp->mem_res.cfg_base = meson_pcie_get_mem(pdev, mp, "cfg");
>> + if (IS_ERR(mp->mem_res.cfg_base))
>> + return PTR_ERR(mp->mem_res.cfg_base);
>> +
>> + /* Meson SoC has two PCI controllers use same phy register*/
>> + mp->mem_res.phy_base = meson_pcie_get_mem_shared(pdev, mp, "phy");
>> + if (IS_ERR(mp->mem_res.phy_base))
>> + return PTR_ERR(mp->mem_res.phy_base);
>> +
>> + return 0;
>> +}
>> +
>> +static void meson_pcie_power_on(struct meson_pcie *mp)
>> +{
>> + writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
>> +}
>> +
>> +static void meson_pcie_reset(struct meson_pcie *mp)
>> +{
>> + struct meson_pcie_rc_reset *mrst = &mp->mrst;
>> +
>> + reset_control_assert(mrst->phy);
>> + udelay(PCIE_RESET_DELAY);
>> + reset_control_deassert(mrst->phy);
>> + udelay(PCIE_RESET_DELAY);
>> +
>> + reset_control_assert(mrst->port);
>> + reset_control_assert(mrst->apb);
>> + udelay(PCIE_RESET_DELAY);
>> + reset_control_deassert(mrst->port);
>> + reset_control_deassert(mrst->apb);
>> + udelay(PCIE_RESET_DELAY);
>> +}
>> +
>> +static inline struct clk *meson_pcie_probe_clock(struct device *dev,
>> + const char *id, u64 rate)
>> +{
>> + struct clk *clk;
>> + int ret;
>> +
>> + clk = devm_clk_get(dev, id);
>> + if (IS_ERR(clk))
>> + return clk;
>> +
>> + if (rate) {
>> + ret = clk_set_rate(clk, rate);
>> + if (ret) {
>> + dev_err(dev, "set clk rate failed, ret = %d\n", ret);
>> + return ERR_PTR(ret);
>> + }
>> + }
>> +
>> + ret = clk_prepare_enable(clk);
>> + if (ret) {
>> + dev_err(dev, "couldn't enable clk\n");
>> + return ERR_PTR(ret);
>> + }
>> +
>> + devm_add_action_or_reset(dev,
>> + (void (*) (void *))clk_disable_unprepare,
>> + clk);
>> +
>> + return clk;
>> +}
>> +
>> +static int meson_pcie_probe_clocks(struct meson_pcie *mp)
>> +{
>> + struct device *dev = mp->pci.dev;
>> + struct meson_pcie_clk_res *res = &mp->clk_res;
>> +
>> + res->port_clk = meson_pcie_probe_clock(dev, "port", PORT_CLK_RATE);
>> + if (IS_ERR(res->port_clk))
>> + return PTR_ERR(res->port_clk);
>> +
>> + res->mipi_gate = meson_pcie_probe_clock(dev, "pcie_mipi_en", 0);
>> + if (IS_ERR(res->mipi_gate))
>> + return PTR_ERR(res->mipi_gate);
>> +
>> + res->general_clk = meson_pcie_probe_clock(dev, "pcie_general", 0);
>> + if (IS_ERR(res->general_clk))
>> + return PTR_ERR(res->general_clk);
>> +
>> + res->clk = meson_pcie_probe_clock(dev, "pcie", 0);
>> + if (IS_ERR(res->clk))
>> + return PTR_ERR(res->clk);
>> +
>> + return 0;
>> +}
>> +
>> +static inline void meson_elb_writel(struct meson_pcie *mp, u32 val, u32 reg)
>> +{
>> + writel(val, mp->mem_res.elbi_base + reg);
>> +}
>> +
>> +static inline u32 meson_elb_readl(struct meson_pcie *mp, u32 reg)
>> +{
>> + return readl(mp->mem_res.elbi_base + reg);
>> +}
>> +
>> +static inline u32 meson_cfg_readl(struct meson_pcie *mp, u32 reg)
>> +{
>> + return readl(mp->mem_res.cfg_base + reg);
>> +}
>> +
>> +static inline void meson_cfg_writel(struct meson_pcie *mp, u32 val, u32 reg)
>> +{
>> + writel(val, mp->mem_res.cfg_base + reg);
>> +}
>> +
>> +static void meson_pcie_assert_reset(struct meson_pcie *mp)
>> +{
>> + gpiod_set_value_cansleep(mp->reset_gpio, 0);
>> + udelay(500);
>> + gpiod_set_value_cansleep(mp->reset_gpio, 1);
>> +}
>> +
>> +static void meson_pcie_init_dw(struct meson_pcie *mp)
>> +{
>> + u32 val;
>> +
>> + val = meson_cfg_readl(mp, PCIE_CFG0);
>> + val |= APP_LTSSM_ENABLE;
>> + meson_cfg_writel(mp, val, PCIE_CFG0);
>> +
>> + val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
>> + val &= ~LINK_CAPABLE_MASK;
>> + meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>> +
>> + val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
>> + val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
>> + meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>> +
>> + val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
>> + val &= ~NUM_OF_LANES_MASK;
>> + meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
>> +
>> + val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
>> + val |= NUM_OF_LANES_X1 | DIRECT_SPEED_CHANGE;
>> + meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
>> +
>> + meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR0);
>> + meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR1);
>> +}
>> +
>> +static int meson_size_to_payload(struct meson_pcie *mp, int size)
>> +{
>> + struct device *dev = mp->pci.dev;
>> +
>> + /*
>> + * dwc supports 2^(val+7) payload size, which val is 0~5 default to 1.
>> + * So if input size is not 2^order alignment or less than 2^7 or bigger
>> + * than 2^12, just set to default size 2^(1+7).
>> + */
>> + if (!is_power_of_2(size) || size < 128 || size > 4096) {
>> + dev_warn(dev, "playload size %d, set to default 256\n", size);
>> + return 1;
>> + }
>> +
>> + return fls(size) - 8;
>> +}
>> +
>> +static void meson_set_max_payload(struct meson_pcie *mp, int size)
>> +{
>> + u32 val = 0;
>> + int max_payload_size = meson_size_to_payload(mp, size);
>> +
>> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> + val &= ~PCIE_CAP_MAX_PAYLOAD_MASK;
>> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +
>> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> + val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
>> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +}
>> +
>> +static void meson_set_max_rd_req_size(struct meson_pcie *mp, int size)
>> +{
>> + u32 val;
>> + int max_rd_req_size = meson_size_to_payload(mp, size);
>> +
>> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> + val &= ~PCIE_CAP_MAX_READ_REQ_MASK;
>> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +
>> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> + val |= PCIE_CAP_MAX_READ_REQ_SIZE(max_rd_req_size);
>> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +}
>> +
>> +static inline void meson_enable_memory_space(struct meson_pcie *mp)
>> +{
>> + /* Set the RC Bus Master, Memory Space and I/O Space enables */
>> + meson_elb_writel(mp, PCI_IO_EN | PCI_MEM_SPACE_EN | PCI_BUS_MASTER_EN,
>> + PCIE_STATUS_COMMAND);
>> +}
>> +
>> +static int meson_pcie_establish_link(struct meson_pcie *mp)
>> +{
>> + struct dw_pcie *pci = &mp->pci;
>> + struct pcie_port *pp = &pci->pp;
>> +
>> + meson_pcie_init_dw(mp);
>> + meson_set_max_payload(mp, MAX_PAYLOAD_SIZE);
>> + meson_set_max_rd_req_size(mp, MAX_READ_REQ_SIZE);
>> +
>> + dw_pcie_setup_rc(pp);
>> + meson_enable_memory_space(mp);
>> +
>> + meson_pcie_assert_reset(mp);
>> +
>> + return dw_pcie_wait_for_link(pci);
>> +}
>> +
>> +static void meson_pcie_enable_interrupts(struct meson_pcie *mp)
>> +{
>> + if (IS_ENABLED(CONFIG_PCI_MSI))
>> + dw_pcie_msi_init(&mp->pci.pp);
>> +}
>> +
>> +static int meson_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
>> + u32 *val)
>> +{
>> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> + int ret;
>> +
>> + ret = dw_pcie_read(pci->dbi_base + where, size, val);
>> + if (ret != PCIBIOS_SUCCESSFUL)
>> + return ret;
>> +
>> + /*
>> + * There is a bug in the MESON AXG pcie controller whereby software
>> + * cannot programme the PCI_CLASS_DEVICE register, so we must fabricate
>> + * the return value in the config accessors.
>> + */
>> + if (where == PCI_CLASS_REVISION && size == 4)
>> + *val = (PCI_CLASS_BRIDGE_PCI << 16) | (*val & 0xffff);
>> + else if (where == PCI_CLASS_DEVICE && size == 2)
>> + *val = PCI_CLASS_BRIDGE_PCI;
>> + else if (where == PCI_CLASS_DEVICE && size == 1)
>> + *val = PCI_CLASS_BRIDGE_PCI & 0xff;
>> + else if (where == PCI_CLASS_DEVICE + 1 && size == 1)
>> + *val = (PCI_CLASS_BRIDGE_PCI >> 8) & 0xff;
>> +
>> + return PCIBIOS_SUCCESSFUL;
>> +}
>> +
>> +static int meson_pcie_wr_own_conf(struct pcie_port *pp, int where,
>> + int size, u32 val)
>> +{
>> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> +
>> + return dw_pcie_write(pci->dbi_base + where, size, val);
>> +}
>> +
>> +static int meson_pcie_link_up(struct dw_pcie *pci)
>> +{
>> + struct meson_pcie *mp = to_meson_pcie(pci);
>> + struct device *dev = pci->dev;
>> + u32 smlh_up = 0;
>> + u32 ltssm_up = 0;
>> + u32 rdlh_up = 0;
>> + u32 speed_okay = 0;
>> + u32 cnt = 0;
>> + u32 state12, state17;
>> +
>
> Nit: a
>
> do {
>
> } while (...)
>
> makes more sense given the variables you are checking.
>
> Lorenzo
>
Yes, it's more readable, I'll modify that.
thanks for all.
>> + while (smlh_up == 0 || rdlh_up == 0 || ltssm_up == 0 ||
>> + speed_okay == 0) {
>> + udelay(20);
>> +
>> + state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12);
>> + state17 = meson_cfg_readl(mp, PCIE_CFG_STATUS17);
>> + smlh_up = IS_SMLH_LINK_UP(state12);
>> + rdlh_up = IS_RDLH_LINK_UP(state12);
>> + ltssm_up = IS_LTSSM_UP(state12);
>> +
>> + if (PM_CURRENT_STATE(state17) < PCIE_GEN3)
>> + speed_okay = 1;
>> +
>> + if (smlh_up)
>> + dev_dbg(dev, "smlh_link_up is on\n");
>> + if (rdlh_up)
>> + dev_dbg(dev, "rdlh_link_up is on\n");
>> + if (ltssm_up)
>> + dev_dbg(dev, "ltssm_up is on\n");
>> + if (speed_okay)
>> + dev_dbg(dev, "speed_okay\n");
>> +
>> + cnt++;
>> +
>> + if (cnt >= WAIT_LINKUP_TIMEOUT) {
>> + dev_err(dev, "Error: Wait linkup timeout.\n");
>> + return 0;
>> + }
>> + }
>> +
>> + return 1;
>> +}
>> +
>> +static int meson_pcie_host_init(struct pcie_port *pp)
>> +{
>> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> + struct meson_pcie *mp = to_meson_pcie(pci);
>> + int ret;
>> +
>> + ret = meson_pcie_establish_link(mp);
>> + if (ret)
>> + return ret;
>> +
>> + meson_pcie_enable_interrupts(mp);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dw_pcie_host_ops meson_pcie_host_ops = {
>> + .rd_own_conf = meson_pcie_rd_own_conf,
>> + .wr_own_conf = meson_pcie_wr_own_conf,
>> + .host_init = meson_pcie_host_init,
>> +};
>> +
>> +static int meson_add_pcie_port(struct meson_pcie *mp,
>> + struct platform_device *pdev)
>> +{
>> + struct dw_pcie *pci = &mp->pci;
>> + struct pcie_port *pp = &pci->pp;
>> + struct device *dev = &pdev->dev;
>> + int ret;
>> +
>> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> + pp->msi_irq = platform_get_irq(pdev, 0);
>> + if (pp->msi_irq < 0) {
>> + dev_err(dev, "failed to get msi irq\n");
>> + return pp->msi_irq;
>> + }
>> + }
>> +
>> + pp->ops = &meson_pcie_host_ops;
>> + pci->dbi_base = mp->mem_res.elbi_base;
>> +
>> + ret = dw_pcie_host_init(pp);
>> + if (ret) {
>> + dev_err(dev, "failed to initialize host\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dw_pcie_ops dw_pcie_ops = {
>> + .link_up = meson_pcie_link_up,
>> +};
>> +
>> +static int meson_pcie_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct dw_pcie *pci;
>> + struct meson_pcie *mp;
>> + int ret;
>> +
>> + mp = devm_kzalloc(dev, sizeof(*mp), GFP_KERNEL);
>> + if (!mp)
>> + return -ENOMEM;
>> +
>> + pci = &mp->pci;
>> + pci->dev = dev;
>> + pci->ops = &dw_pcie_ops;
>> +
>> + mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>> + if (IS_ERR(mp->reset_gpio)) {
>> + dev_err(dev, "Get reset gpio failed\n");
>> + return PTR_ERR(mp->reset_gpio);
>> + }
>> +
>> + ret = meson_pcie_get_resets(mp);
>> + if (ret) {
>> + dev_err(dev, "Get reset resource failed, %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = meson_pcie_get_mems(pdev, mp);
>> + if (ret) {
>> + dev_err(dev, "Get memory resource failed, %d\n", ret);
>> + return ret;
>> + }
>> +
>> + meson_pcie_power_on(mp);
>> + meson_pcie_reset(mp);
>> +
>> + ret = meson_pcie_probe_clocks(mp);
>> + if (ret) {
>> + dev_err(dev, "Init clock resources failed, %d\n", ret);
>> + return ret;
>> + }
>> +
>> + platform_set_drvdata(pdev, mp);
>> +
>> + ret = meson_add_pcie_port(mp, pdev);
>> + if (ret < 0) {
>> + dev_err(dev, "Add PCIE port failed, %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id meson_pcie_of_match[] = {
>> + {
>> + .compatible = "amlogic,axg-pcie",
>> + },
>> + {},
>> +};
>> +
>> +static struct platform_driver meson_pcie_driver = {
>> + .probe = meson_pcie_probe,
>> + .driver = {
>> + .name = "meson-pcie",
>> + .of_match_table = meson_pcie_of_match,
>> + },
>> +};
>> +
>> +builtin_platform_driver(meson_pcie_driver);
>> --
>> 2.7.4
>>
>
> .
>