Re: [PATCH V4 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support

From: Jonathan Cameron
Date: Sun Dec 16 2018 - 05:46:49 EST

Next message: Jonathan Cameron: "Re: [PATCH v2 1/4] iio: ti-ads124s08: Add DT binding documentation"
Previous message: Jonathan Cameron: "Re: [PATCH V4 1/2] dt-bindings: iio: accel: mma8452: add optional power supply property"
Next in thread: Jonathan Cameron: "Re: [PATCH V4 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 11 Dec 2018 05:13:20 +0000
Anson Huang <anson.huang@xxxxxxx> wrote:

> The accelerometer's power supply could be controlled by regulator
> on some platforms, such as i.MX6Q-SABRESD board, the mma8451's
> power supply is controlled by a GPIO fixed regulator, need to make
> sure the regulator is enabled before any communication with mma8451,
> this patch adds optional vdd/vddio regulator operation support.
>
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> Acked-by: Martin Kepplinger <martink@xxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
> ChangeLog since V3:
> - add disabling vdd regulator in vddio error path;
> - improve regulator enable/disable sequence.
> ---
> drivers/iio/accel/mma8452.c | 186 +++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 176 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
> index 421a0a8..590a95d 100644
> --- a/drivers/iio/accel/mma8452.c
> +++ b/drivers/iio/accel/mma8452.c
> @@ -31,6 +31,7 @@
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
>
> #define MMA8452_STATUS 0x00
> #define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
> @@ -107,6 +108,8 @@ struct mma8452_data {
> u8 data_cfg;
> const struct mma_chip_info *chip_info;
> int sleep_val;
> + struct regulator *vdd_reg;
> + struct regulator *vddio_reg;
> };
>
> /**
> @@ -1533,10 +1536,35 @@ static int mma8452_probe(struct i2c_client *client,
> data->client = client;
> mutex_init(&data->lock);
> data->chip_info = match->data;
> + data->vdd_reg = devm_regulator_get_optional(&client->dev, "vdd");
> + if (!IS_ERR(data->vdd_reg)) {
> + ret = regulator_enable(data->vdd_reg);
> + if (ret) {
> + dev_err(&client->dev, "failed to enable VDD regulator\n");
> + return ret;
> + }
> + } else {
> + ret = PTR_ERR(data->vdd_reg);
> + if (ret != -ENODEV)
> + return ret;
> + }
> +
> + data->vddio_reg = devm_regulator_get_optional(&client->dev, "vddio");
> + if (!IS_ERR(data->vddio_reg)) {
> + ret = regulator_enable(data->vddio_reg);
> + if (ret) {
> + dev_err(&client->dev, "failed to enable VDDIO regulator\n");
> + goto disable_regulator_vdd;
> + }
> + } else {
> + ret = PTR_ERR(data->vddio_reg);
> + if (ret != -ENODEV)
> + goto disable_regulator_vdd;
> + }
>
> ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
> if (ret < 0)
> - return ret;
> + goto disable_regulators;
>
> switch (ret) {
> case MMA8451_DEVICE_ID:
> @@ -1549,7 +1577,8 @@ static int mma8452_probe(struct i2c_client *client,
> break;
> /* else: fall through */
> default:
> - return -ENODEV;
> + ret = -ENODEV;
> + goto disable_regulators;
> }
>
> dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
> @@ -1566,13 +1595,13 @@ static int mma8452_probe(struct i2c_client *client,
>
> ret = mma8452_reset(client);
> if (ret < 0)
> - return ret;
> + goto disable_regulators;
>
> data->data_cfg = MMA8452_DATA_CFG_FS_2G;
> ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
> data->data_cfg);
> if (ret < 0)
> - return ret;
> + goto disable_regulators;
>
> /*
> * By default set transient threshold to max to avoid events if
> @@ -1581,7 +1610,7 @@ static int mma8452_probe(struct i2c_client *client,
> ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS,
> MMA8452_TRANSIENT_THS_MASK);
> if (ret < 0)
> - return ret;
> + goto disable_regulators;
>
> if (client->irq) {
> int irq2;
> @@ -1595,7 +1624,7 @@ static int mma8452_probe(struct i2c_client *client,
> MMA8452_CTRL_REG5,
> data->chip_info->all_events);
> if (ret < 0)
> - return ret;
> + goto disable_regulators;
>
> dev_dbg(&client->dev, "using interrupt line INT1\n");
> }
> @@ -1604,11 +1633,11 @@ static int mma8452_probe(struct i2c_client *client,
> MMA8452_CTRL_REG4,
> data->chip_info->enabled_events);
> if (ret < 0)
> - return ret;
> + goto disable_regulators;
>
> ret = mma8452_trigger_setup(indio_dev);
> if (ret < 0)
> - return ret;
> + goto disable_regulators;
> }
>
> data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
> @@ -1661,12 +1690,22 @@ static int mma8452_probe(struct i2c_client *client,
> trigger_cleanup:
> mma8452_trigger_cleanup(indio_dev);
>
> +disable_regulators:
> + if (!IS_ERR(data->vddio_reg))
> + regulator_disable(data->vddio_reg);
> +
> +disable_regulator_vdd:
> + if (!IS_ERR(data->vdd_reg))
> + regulator_disable(data->vdd_reg);
> +
> return ret;
> }
>
> static int mma8452_remove(struct i2c_client *client)
> {
> struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct mma8452_data *data = iio_priv(indio_dev);
> + int ret;
>
> iio_device_unregister(indio_dev);
>
> @@ -1678,6 +1717,21 @@ static int mma8452_remove(struct i2c_client *client)
> mma8452_trigger_cleanup(indio_dev);
> mma8452_standby(iio_priv(indio_dev));
>
> + if (!IS_ERR(data->vddio_reg)) {
> + ret = regulator_disable(data->vddio_reg);
> + if (ret) {
> + dev_err(&client->dev, "failed to disable VDDIO regulator\n");
> + return ret;
> + }
> + }
> + if (!IS_ERR(data->vdd_reg)) {
> + ret = regulator_disable(data->vdd_reg);
> + if (ret) {
> + dev_err(&client->dev, "failed to disable VDD regulator\n");
> + return ret;
> + }
> + }
> +
> return 0;
> }
>
> @@ -1696,6 +1750,21 @@ static int mma8452_runtime_suspend(struct device *dev)
> return -EAGAIN;
> }
>
> + if (!IS_ERR(data->vddio_reg)) {
> + ret = regulator_disable(data->vddio_reg);
> + if (ret) {
> + dev_err(dev, "failed to disable VDDIO regulator\n");
> + return ret;
> + }
> + }
> + if (!IS_ERR(data->vdd_reg)) {
> + ret = regulator_disable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "failed to disable VDD regulator\n");
> + return ret;
> + }
> + }
> +
> return 0;
> }
>
> @@ -1705,6 +1774,23 @@ static int mma8452_runtime_resume(struct device *dev)
> struct mma8452_data *data = iio_priv(indio_dev);
> int ret, sleep_val;
>
> + if (!IS_ERR(data->vdd_reg)) {
> + ret = regulator_enable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "failed to enable VDD regulator\n");
> + return ret;
> + }
> + }
> + if (!IS_ERR(data->vddio_reg)) {
> + ret = regulator_enable(data->vddio_reg);
> + if (ret) {
> + dev_err(dev, "failed to enable VDDIO regulator\n");
> + if (!IS_ERR(data->vdd_reg))
> + regulator_disable(data->vdd_reg);
> + return ret;
> + }
> + }
> +
> ret = mma8452_active(data);
> if (ret < 0)
> return ret;
> @@ -1723,14 +1809,94 @@ static int mma8452_runtime_resume(struct device *dev)
> #ifdef CONFIG_PM_SLEEP
> static int mma8452_suspend(struct device *dev)
> {
> - return mma8452_standby(iio_priv(i2c_get_clientdata(
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct mma8452_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + if (!IS_ERR(data->vdd_reg)) {
> + ret = regulator_enable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "failed to enable VDD regulator\n");
> + return ret;
> + }
> + }
> + if (!IS_ERR(data->vddio_reg)) {
> + ret = regulator_enable(data->vddio_reg);
> + if (ret) {
> + dev_err(dev, "failed to enable VDDIO regulator\n");
> + if (!IS_ERR(data->vdd_reg))
> + regulator_disable(data->vdd_reg);
> + return ret;
> + }
> + }
> +
> + ret = mma8452_standby(iio_priv(i2c_get_clientdata(
> to_i2c_client(dev))));
> + if (ret)
> + return ret;
> +
> + if (!IS_ERR(data->vddio_reg)) {
> + ret = regulator_disable(data->vddio_reg);
> + if (ret) {
> + dev_err(dev, "failed to disable VDDIO regulator\n");
> + return ret;
> + }
> + }
> + if (!IS_ERR(data->vdd_reg)) {
> + ret = regulator_disable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "failed to disable VDD regulator\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> }
>
> static int mma8452_resume(struct device *dev)
> {
> - return mma8452_active(iio_priv(i2c_get_clientdata(
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct mma8452_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + if (!IS_ERR(data->vdd_reg)) {
> + ret = regulator_enable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "failed to enable VDD regulator\n");
> + return ret;
> + }
> + }
> + if (!IS_ERR(data->vddio_reg)) {
> + ret = regulator_enable(data->vddio_reg);
> + if (ret) {
> + dev_err(dev, "failed to enable VDDIO regulator\n");
> + if (!IS_ERR(data->vdd_reg))
> + regulator_disable(data->vdd_reg);
> + return ret;
> + }
> + }
> +
> + ret = mma8452_active(iio_priv(i2c_get_clientdata(
> to_i2c_client(dev))));
> + if (ret)
> + return ret;
> +
> + if (!IS_ERR(data->vddio_reg)) {
> + ret = regulator_disable(data->vddio_reg);
> + if (ret) {
> + dev_err(dev, "failed to disable VDDIO regulator\n");
> + return ret;
> + }
> + }
> + if (!IS_ERR(data->vdd_reg)) {
> + ret = regulator_disable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "failed to disable VDD regulator\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> }
> #endif
>

Next message: Jonathan Cameron: "Re: [PATCH v2 1/4] iio: ti-ads124s08: Add DT binding documentation"
Previous message: Jonathan Cameron: "Re: [PATCH V4 1/2] dt-bindings: iio: accel: mma8452: add optional power supply property"
Next in thread: Jonathan Cameron: "Re: [PATCH V4 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]