Re: [PATCH v2 1/4] iio: ti-ads124s08: Add DT binding documentation

[Jonathan Cameron]

On Tue, 11 Dec 2018 13:12:04 -0600
Dan Murphy <dmurphy@xxxxxx> wrote:

> Adding binding documentation for Texas Instruments ADS124S08
> and ADS124S06 ADC.
> 
> S08 is a 12 channel ADC
> S06 is a 6 channel ADC
> 
> Datesheet can be found here:
> http://www.ti.com/lit/gpn/ads124s08
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
> 
> v2 - Fixed incorrect compatible example and removed vref-supply - https://lore.kernel.org/patchwork/patch/1021047/

There is a reasonable argument to put the binding in there even if
not currently used.   However, I see it actually has multiple
power supplies, so perhaps this needs more thought first.

One other thing inline that I 'might' 'fix' depending on what is later
in the series.

> 
>  .../bindings/iio/adc/ti-ads124s08.txt         | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
> new file mode 100644
> index 000000000000..6993e76e61c6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
> @@ -0,0 +1,23 @@
> +* Texas Instruments' ads124s08 and ads124s06 ADC chip
> +
> +Required properties:
> + - compatible: Should be "ti,ads124s08" or "ti,ads124s06"
One per line.
- compatible: Should be one of
	"ti..."
	"ti..."

It's easier to add other parts with out having to rewrite the sentence
to cover the now more than 2 case.

If that's all I find in the series, I'll just fix it up when applying.

Jonathan
> + - reg: spi chip select number for the device
> +
> +Recommended properties:
> + - spi-max-frequency: Definition as per
> +		Documentation/devicetree/bindings/spi/spi-bus.txt
> + - spi-cpha: Definition as per
> +		Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Optional properties:
> + - reset-gpios: GPIO pin used to reset the device.
> +
> +Example:
> +adc@0 {
> +	compatible = "ti,ads124s08";
> +	reg = <0>;
> +	spi-max-frequency = <1000000>;
> +	spi-cpha;
> +	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
> +};