[PATCH v7 3/4] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer

From: Balakrishna Godavarthi
Date: Fri Dec 28 2018 - 06:48:49 EST

During hci down we observed IBS sleep commands are queued in the Tx
buffer and hci_uart_write_work is sending data to the chip which is
not required as the chip is powered off. This patch will disable IBS
and flush the Tx buffer before we turn off the chip.

Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
drivers/bluetooth/hci_qca.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index b79ef901ab8b..9d5e41f159c7 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1274,6 +1274,14 @@ static const struct qca_vreg_data qca_soc_data = {

static void qca_power_shutdown(struct hci_uart *hu)
+ struct qca_data *qca = hu->priv;
+ /* From this point we go into power off state. But serial port is
+ * still open, stop queueing the IBS data and flush all the buffered
+ * data in skb's.
+ */
+ clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ qca_flush(hu);
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
qca_power_setup(hu, false);
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project