[PATCH v2 3/4] usb: musb: Extract set toggle as a separate interface

From: min.guo
Date: Mon Jan 14 2019 - 20:44:13 EST


From: Min Guo <min.guo@xxxxxxxxxxxx>

Add a common interface for set data toggle

Signed-off-by: Min Guo <min.guo@xxxxxxxxxxxx>
---
drivers/usb/musb/musb_host.c | 37 +++++++++++++++++++++++--------------
1 file changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index b59ce9a..16d0ba4 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -306,6 +306,25 @@ static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
}

+static inline u16 musb_set_toggle(struct musb_qh *qh, int is_in,
+ struct urb *urb)
+{
+ u16 csr = 0;
+ u16 toggle = 0;
+
+ toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
+
+ if (is_in)
+ csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
+ | MUSB_RXCSR_H_DATATOGGLE) : 0;
+ else
+ csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
+ | MUSB_TXCSR_H_DATATOGGLE)
+ : MUSB_TXCSR_CLRDATATOG;
+
+ return csr;
+}
+
/*
* Advance this hardware endpoint's queue, completing the specified URB and
* advancing to either the next URB queued to that qh, or else invalidating
@@ -772,13 +791,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
);
csr |= MUSB_TXCSR_MODE;

- if (!hw_ep->tx_double_buffered) {
- if (usb_gettoggle(urb->dev, qh->epnum, 1))
- csr |= MUSB_TXCSR_H_WR_DATATOGGLE
- | MUSB_TXCSR_H_DATATOGGLE;
- else
- csr |= MUSB_TXCSR_CLRDATATOG;
- }
+ if (!hw_ep->tx_double_buffered)
+ csr |= musb_set_toggle(qh, !is_out, urb);

musb_writew(epio, MUSB_TXCSR, csr);
/* REVISIT may need to clear FLUSHFIFO ... */
@@ -860,17 +874,12 @@ static void musb_ep_program(struct musb *musb, u8 epnum,

/* IN/receive */
} else {
- u16 csr;
+ u16 csr = 0;

if (hw_ep->rx_reinit) {
musb_rx_reinit(musb, qh, epnum);
+ csr |= musb_set_toggle(qh, !is_out, urb);

- /* init new state: toggle and NYET, maybe DMA later */
- if (usb_gettoggle(urb->dev, qh->epnum, 0))
- csr = MUSB_RXCSR_H_WR_DATATOGGLE
- | MUSB_RXCSR_H_DATATOGGLE;
- else
- csr = 0;
if (qh->type == USB_ENDPOINT_XFER_INT)
csr |= MUSB_RXCSR_DISNYET;

--
1.9.1