Re: [PATCH v2 3/4] usb: musb: Extract set toggle as a separate interface

[Matthias Brugger]

On 15/01/2019 02:43, min.guo@xxxxxxxxxxxx wrote:
> From: Min Guo <min.guo@xxxxxxxxxxxx>
> 
> Add a common interface for set data toggle
> 
> Signed-off-by: Min Guo <min.guo@xxxxxxxxxxxx>
> ---
>  drivers/usb/musb/musb_host.c | 37 +++++++++++++++++++++++--------------
>  1 file changed, 23 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> index b59ce9a..16d0ba4 100644
> --- a/drivers/usb/musb/musb_host.c
> +++ b/drivers/usb/musb/musb_host.c
> @@ -306,6 +306,25 @@ static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
>  	usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
>  }
>  
> +static inline u16 musb_set_toggle(struct musb_qh *qh, int is_in,
> +	struct urb *urb)
> +{
> +	u16 csr = 0;
> +	u16 toggle = 0;
> +
> +	toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
> +
> +	if (is_in)
> +		csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
> +				| MUSB_RXCSR_H_DATATOGGLE) : 0;
> +	else
> +		csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
> +				| MUSB_TXCSR_H_DATATOGGLE)
> +				: MUSB_TXCSR_CLRDATATOG;

Can we switch the if and use is_out logic as function parameter. This would make
the code easier to understand.

Regards,
Matthias

> +
> +	return csr;
> +}
> +
>  /*
>   * Advance this hardware endpoint's queue, completing the specified URB and
>   * advancing to either the next URB queued to that qh, or else invalidating
> @@ -772,13 +791,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
>  					);
>  			csr |= MUSB_TXCSR_MODE;
>  
> -			if (!hw_ep->tx_double_buffered) {
> -				if (usb_gettoggle(urb->dev, qh->epnum, 1))
> -					csr |= MUSB_TXCSR_H_WR_DATATOGGLE
> -						| MUSB_TXCSR_H_DATATOGGLE;
> -				else
> -					csr |= MUSB_TXCSR_CLRDATATOG;
> -			}
> +			if (!hw_ep->tx_double_buffered)
> +				csr |= musb_set_toggle(qh, !is_out, urb);
>  
>  			musb_writew(epio, MUSB_TXCSR, csr);
>  			/* REVISIT may need to clear FLUSHFIFO ... */
> @@ -860,17 +874,12 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
>  
>  	/* IN/receive */
>  	} else {
> -		u16	csr;
> +		u16 csr = 0;
>  
>  		if (hw_ep->rx_reinit) {
>  			musb_rx_reinit(musb, qh, epnum);
> +			csr |= musb_set_toggle(qh, !is_out, urb);
>  
> -			/* init new state: toggle and NYET, maybe DMA later */
> -			if (usb_gettoggle(urb->dev, qh->epnum, 0))
> -				csr = MUSB_RXCSR_H_WR_DATATOGGLE
> -					| MUSB_RXCSR_H_DATATOGGLE;
> -			else
> -				csr = 0;
>  			if (qh->type == USB_ENDPOINT_XFER_INT)
>  				csr |= MUSB_RXCSR_DISNYET;
>  
>