[PATCH v4] mmc: mxs-mmc: Introduce regulator support
From: Martin Kepplinger
Date: Mon Jan 28 2019 - 09:41:35 EST
From: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx>
This adds support for explicitly switching the mmc's power on and off
which is needed for example for WL1837 WL1271 wifi controllers on imx28.
While the wifi's vmmc-supply regulator can be configured in devicetree,
"ip link set wlan0 down" doesn't turn off the VMMC regulator which leads
to hangs when loading firmware, for example.
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx>
---
revision history
----------------
v4: re-added forgotten regulator_enable() during probe
v3: improve API usage as suggested by Ulf
v2: tested patch with changes suggested by Robin
v1: question, why https://patchwork.kernel.org/patch/4365751/ didn't get in
drivers/mmc/host/mxs-mmc.c | 34 +++++++++++++++++++++++++---------
1 file changed, 25 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index add1e70195ea..23d275269d61 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -517,6 +517,22 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
else
host->bus_width = 0;
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ if (!IS_ERR(host->mmc->supply.vmmc))
+ mmc_regulator_set_ocr(host->mmc,
+ host->mmc->supply.vmmc, 0);
+ break;
+ case MMC_POWER_UP:
+ if (!IS_ERR(host->mmc->supply.vmmc))
+ mmc_regulator_set_ocr(host->mmc,
+ host->mmc->supply.vmmc,
+ ios->vdd);
+ break;
+ default:
+ break;
+ }
+
if (ios->clock)
mxs_ssp_set_clk_rate(&host->ssp, ios->clock);
}
@@ -588,7 +604,6 @@ static int mxs_mmc_probe(struct platform_device *pdev)
struct mmc_host *mmc;
struct resource *iores;
int ret = 0, irq_err;
- struct regulator *reg_vmmc;
struct mxs_ssp *ssp;
irq_err = platform_get_irq(pdev, 0);
@@ -614,14 +629,15 @@ static int mxs_mmc_probe(struct platform_device *pdev)
host->mmc = mmc;
host->sdio_irq_en = 0;
- reg_vmmc = devm_regulator_get(&pdev->dev, "vmmc");
- if (!IS_ERR(reg_vmmc)) {
- ret = regulator_enable(reg_vmmc);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to enable vmmc regulator: %d\n", ret);
- goto out_mmc_free;
- }
+ ret = mmc_regulator_get_supply(mmc);
+ if (ret == -EPROBE_DEFER)
+ goto out_mmc_free;
+
+ ret = regulator_enable(mmc->supply.vmmc);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable vmmc regulator: %d\n", ret);
+ goto out_mmc_free;
}
ssp->clk = devm_clk_get(&pdev->dev, NULL);
--
2.20.1