Re: [PATCH V15 4/6] i2c: tegra: Add DMA support

From: Dmitry Osipenko
Date: Fri Feb 08 2019 - 11:15:27 EST

08.02.2019 18:58, Sowjanya Komatineni ÐÐÑÐÑ:
>>> Please use "release_dma:" variant that I suggested in the comment to v14 because:
>>> 1) It's just a good (and common-style in kernel) tone to unwind errors handling in the opposite order, it makes code more straight forward and helps to avoid silly mistakes.
>>> 2) It keeps the current code consistent in regards to probe error-handling.
>> Can move tegra_i2c_release_dma under the same disable_div_clk label before clk_disable
>> Order in probe is
> clk_prepare
> i2c_runtime_resume
> clk_enable in case of multimaster mode
> i2c_init_dma
>> unwinding should be order is
> release_dma
> disable_div_clk
> disable_rpm
> unprepared
>> Probe failure from tegra_i2c_init_dma, tegra_i2c_init, devm_request_irq, i2c_add_numbered_adapter all of them perform goto disable_div_clk
>> I can add tegra_i2c_release_dma before performing clock disable under same disable_div_clk so all existing disable_div_clk labels remain same.
>> Otherwise adding new label release_dma causes all goto disable_div_clk statement also to be changed but its same as adding release_dma under disable_div_clk above the clk_disable.
> OK, please ignore above. will add release_dma to show explicitly for readability.
> With release_dma all error handlers performing disable_clk_div need to go thru release dma and disable_clk_div label is not needed.

tegra_i2c_init_dma() releases dma itself in a case of error, hence it should jump to the disable_clk_div.

> So having release dma under disable_clk before clk_disable function is also same.
> Please confirm if this is ok to use same disable_div_clk or do you prefer release_dma label removing disable_div_clk

In general goto-label naming should reflect the actual jump-action. If goto jumps to dma-releasing, then the action is release-dma and not disable-clk.

Hence the correct variant is:

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 7104213d813b..62e81096fb55 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1604,14 +1604,14 @@ static int tegra_i2c_probe(struct platform_device *pdev)
ret = tegra_i2c_init(i2c_dev, false);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
- goto disable_div_clk;
+ goto release_dma;

ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
- goto disable_div_clk;
+ goto release_dma;

i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
@@ -1625,14 +1625,16 @@ static int tegra_i2c_probe(struct platform_device *pdev)

ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
if (ret)
- goto disable_div_clk;
+ goto release_dma;

return 0;

+ tegra_i2c_release_dma(i2c_dev);
if (i2c_dev->is_multimaster_mode)
- tegra_i2c_release_dma(i2c_dev);