Re: [PATCH v2 00/15] Add basic support for Socionext Milbeaut M10V SoC

From: Daniel Lezcano
Date: Mon Feb 18 2019 - 07:29:34 EST


On 18/02/2019 13:20, Arnd Bergmann wrote:
> On Fri, Feb 8, 2019 at 1:24 PM Sugaya Taichi
> <sugaya.taichi@xxxxxxxxxxxxx> wrote:
>>
>> Hi,
>>
>> Here is the series of patches the initial support for SC2000(M10V) of
>> Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in
>> source code.
>>
>> SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
>> computer vision. It also features advanced functionalities such as 360-degree,
>> real-time spherical stitching with multi cameras, image stabilization for
>> without mechanical gimbals, and rolling shutter correction. More detail is
>> below:
>> https://www.socionext.com/en/products/assp/milbeaut/SC2000.html
>>
>> Specifications for developers are below:
>> - Quad-core 32bit Cortex-A7 on ARMv7-A architecture
>> - NEON support
>> - DSP
>> - GPU
>> - MAX 3GB DDR3
>> - Cortex-M0 for power control
>> - NAND Flash Interface
>> - SD UHS-I
>> - SD UHS-II
>> - SDIO
>> - USB2.0 HOST / Device
>> - USB3.0 HOST / Device
>> - PCI express Gen2
>> - Ethernet Engine
>> - I2C
>> - UART
>> - SPI
>> - PWM
>>
>> Support is quite minimal for now, since it only includes timer, clock,
>> pictrl and serial controller drivers, so we can only boot to userspace
>> through initramfs. Support for the other peripherals will come eventually.
>
> I've looked over the platform once more. Overall, it looks very good, and
> I'd still like to merge this for linux-5.1, but we are running out of time
> there. If you send the patches to soc@xxxxxxxxxx quickly, we can try to
> still merge them in, but if anything goes wrong, it will have to wait until
> we start merging patches for 5.2, directly after 5.1 is out.
>
> I did not look at the device driver patches (clk, clocksource, pinctrl, serial)
> in much detail. If you have an Ack from the maintainers, feel free to
> include them in the series, otherwise let's merge the rest now and then
> you can send the updated patches for inclusion through the subsystem
> trees in 5.2.

I'm not in copy of the clocksource patch but I acked it for the initial
post.

> I have sent a few comments. The only one that is really important
> here is the missing platform check in the suspend options. Please
> try to address most of the other commentsm, either by changing the
> code, or by explaining why your version is correct.
>
>
>
> Arnd
>


--
<http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog