[PATCH 3/3] usb: gadget: atmel: tie wake lock to running clock

[Jonas Bonn]

If the USB device is connected to a host, the CPU cannot be suspended or
else the USB device appears to be disconnected from the host's point of
view.  Only after a "USB suspend" state has been entered (as set by the
host) or the host is disconnected can the system safely be suspended: in
both these states, the clock is stopped.  As such, this patch associates
a "wake lock" with the running clock of the UDC to keep the system awake
as long as the host maintains the USB connection active.

Signed-off-by: Jonas Bonn <jonas@xxxxxxxxxxx>
CC: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
CC: Felipe Balbi <balbi@xxxxxxxxxx>
CC: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
CC: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
CC: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
CC: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
CC: linux-usb@xxxxxxxxxxxxxxx
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 740cb9308a86..864d03c3c9db 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1859,6 +1859,8 @@ static int start_clock(struct usba_udc *udc)
 	if (udc->clocked)
 		return 0;
 
+	pm_stay_awake(&udc->pdev->dev);
+
 	ret = clk_prepare_enable(udc->pclk);
 	if (ret)
 		return ret;
@@ -1881,6 +1883,8 @@ static void stop_clock(struct usba_udc *udc)
 	clk_disable_unprepare(udc->pclk);
 
 	udc->clocked = false;
+
+	pm_relax(&udc->pdev->dev);
 }
 
 static int usba_start(struct usba_udc *udc)
-- 
2.19.1