[PATCH 1/3] usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
From: Jonas Bonn
Date: Wed Feb 20 2019 - 07:20:28 EST
This patch adds set and clear functions for enabling/disabling
interrupts. This simplifies the implementation a bit as the masking of
previously set bits doesn't need to be so explicit.
Signed-off-by: Jonas Bonn <jonas@xxxxxxxxxxx>
CC: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
CC: Felipe Balbi <balbi@xxxxxxxxxx>
CC: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
CC: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
CC: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
CC: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
CC: linux-usb@xxxxxxxxxxxxxxx
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 29 ++++++++++++++++---------
1 file changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 51a2b9232baa..9d18fdddd9b2 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -358,8 +358,20 @@ static inline u32 usba_int_enb_get(struct usba_udc *udc)
return udc->int_enb_cache;
}
-static inline void usba_int_enb_set(struct usba_udc *udc, u32 val)
+static inline void usba_int_enb_set(struct usba_udc *udc, u32 mask)
{
+ u32 val;
+
+ val = udc->int_enb_cache | mask;
+ usba_writel(udc, INT_ENB, val);
+ udc->int_enb_cache = val;
+}
+
+static inline void usba_int_enb_clear(struct usba_udc *udc, u32 mask)
+{
+ u32 val;
+
+ val = udc->int_enb_cache & ~mask;
usba_writel(udc, INT_ENB, val);
udc->int_enb_cache = val;
}
@@ -629,14 +641,12 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
if (ep->can_dma) {
u32 ctrl;
- usba_int_enb_set(udc, usba_int_enb_get(udc) |
- USBA_BF(EPT_INT, 1 << ep->index) |
+ usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index) |
USBA_BF(DMA_INT, 1 << ep->index));
ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
usba_ep_writel(ep, CTL_ENB, ctrl);
} else {
- usba_int_enb_set(udc, usba_int_enb_get(udc) |
- USBA_BF(EPT_INT, 1 << ep->index));
+ usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index));
}
spin_unlock_irqrestore(&udc->lock, flags);
@@ -680,8 +690,7 @@ static int usba_ep_disable(struct usb_ep *_ep)
usba_dma_readl(ep, STATUS);
}
usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
- usba_int_enb_set(udc, usba_int_enb_get(udc) &
- ~USBA_BF(EPT_INT, 1 << ep->index));
+ usba_int_enb_clear(udc, USBA_BF(EPT_INT, 1 << ep->index));
request_complete_list(ep, &req_list, -ESHUTDOWN);
@@ -1713,7 +1722,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
if (status & USBA_DET_SUSPEND) {
toggle_bias(udc, 0);
usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
- usba_int_enb_set(udc, int_enb | USBA_WAKE_UP);
+ usba_int_enb_set(udc, USBA_WAKE_UP);
udc->bias_pulse_needed = true;
DBG(DBG_BUS, "Suspend detected\n");
if (udc->gadget.speed != USB_SPEED_UNKNOWN
@@ -1727,7 +1736,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
if (status & USBA_WAKE_UP) {
toggle_bias(udc, 1);
usba_writel(udc, INT_CLR, USBA_WAKE_UP);
- usba_int_enb_set(udc, int_enb & ~USBA_WAKE_UP);
+ usba_int_enb_clear(udc, USBA_WAKE_UP);
DBG(DBG_BUS, "Wake Up CPU detected\n");
}
@@ -1796,7 +1805,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
usba_ep_writel(ep0, CTL_ENB,
USBA_EPT_ENABLE | USBA_RX_SETUP);
- usba_int_enb_set(udc, int_enb | USBA_BF(EPT_INT, 1) |
+ usba_int_enb_set(udc, USBA_BF(EPT_INT, 1) |
USBA_DET_SUSPEND | USBA_END_OF_RESUME);
/*
--
2.19.1