Re: [PATCH] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board

[Maxime Ripard]

Hi,

Thanks for your patch

On Thu, Feb 28, 2019 at 10:28:40PM +0100, Andreas Kemnade wrote:
> The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip
> with broadcom internals attached to UART1 and some gpios.
> This addition is in line with similar boards
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
>  .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts    | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> index 1db2541135a7..39e206fac4e3 100644
> --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> @@ -69,6 +69,8 @@
>  		compatible = "mmc-pwrseq-simple";
>  		pinctrl-names = "default";
>  		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
> +		clocks = <&rtc 1>;
> +		clock-names = "ext_clock";
>  	};
>  };
>  
> @@ -122,7 +124,34 @@
>  &uart1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> +	uart-has-rtscts;
>  	status = "okay";
> +
> +	bluetooth {
> +		compatible = "brcm,bcm43438-bt";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&bt_pins_out>, <&bt_pins_in>;
> +		clocks = <&rtc 1>;
> +		clock-names = "lpo";
> +		vbat-supply = <&reg_vcc3v3>;
> +		vddio-supply = <&reg_vcc3v3>;
> +		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
> +		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
> +		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
> +	};
> +
> +};
> +
> +&pio {
> +	bt_pins_out: bt_out {
> +		pins = "PG12", "PG13";
> +		function = "gpio_out";
> +	};
> +
> +	bt_pins_in: bt_in {
> +		pins = "PG11";
> +		function = "gpio_in";
> +	};

You don't need any of those pinctrl nodes, GPIOs work fine without.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature