Re: [PATCH 1/3] phy: rockchip-emmc: Allow to set drive impedance via DTS.

[Heiko Stuebner]

Hi Christoph,

Am Freitag, 1. März 2019, 16:33:43 CET schrieb Christoph Muellner:
> The rockchip-emmc PHY can be configured with different
> drive impedance values. Currenlty a value of 50 Ohm is
> hard coded into the driver.
> 
> This patch introduces the DTS property 'drive-impedance-ohm'
> for the rockchip-emmc phy node, which uses the value from the DTS
> to setup the drive impedance accordingly.
> 
> Signed-off-by: Christoph Muellner <christoph.muellner@xxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Philipp Tomsich <philipp.tomsich@xxxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/phy/rockchip/phy-rockchip-emmc.c | 38 ++++++++++++++++++++++++++++++--

looks good on first glance, but is missing an addition to the emmc-phy
devicetree binding in
	Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt


Heiko

>  1 file changed, 36 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
> index 19bf84f0bc67..5413fa73dd45 100644
> --- a/drivers/phy/rockchip/phy-rockchip-emmc.c
> +++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
> @@ -87,6 +87,7 @@ struct rockchip_emmc_phy {
>  	unsigned int	reg_offset;
>  	struct regmap	*reg_base;
>  	struct clk	*emmcclk;
> +	unsigned int drive_impedance;
>  };
>  
>  static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
> @@ -281,10 +282,10 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
>  {
>  	struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
>  
> -	/* Drive impedance: 50 Ohm */
> +	/* Drive impedance: from DTS */
>  	regmap_write(rk_phy->reg_base,
>  		     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
> -		     HIWORD_UPDATE(PHYCTRL_DR_50OHM,
> +		     HIWORD_UPDATE(rk_phy->drive_impedance,
>  				   PHYCTRL_DR_MASK,
>  				   PHYCTRL_DR_SHIFT));
>  
> @@ -314,6 +315,28 @@ static const struct phy_ops ops = {
>  	.owner		= THIS_MODULE,
>  };
>  
> +static u32 convert_drive_impedance_ohm(struct platform_device *pdev, u32 dr_ohm)
> +{
> +	switch (dr_ohm) {
> +	case 100:
> +		return PHYCTRL_DR_100OHM;
> +	case 66:
> +		return PHYCTRL_DR_66OHM;
> +	case 50:
> +		return PHYCTRL_DR_50OHM;
> +	case 40:
> +		return PHYCTRL_DR_40OHM;
> +	case 33:
> +		return PHYCTRL_DR_33OHM;
> +	}
> +
> +	dev_warn(&pdev->dev,
> +		"Invalid value %u for drive-impedance-ohm. "
> +		"Falling back to 50 Ohm.\n",
> +		dr_ohm);
> +	return PHYCTRL_DR_50OHM;
> +}
> +
>  static int rockchip_emmc_phy_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -322,6 +345,7 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
>  	struct phy_provider *phy_provider;
>  	struct regmap *grf;
>  	unsigned int reg_offset;
> +	u32 val;
>  
>  	if (!dev->parent || !dev->parent->of_node)
>  		return -ENODEV;
> @@ -345,6 +369,16 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
>  	rk_phy->reg_offset = reg_offset;
>  	rk_phy->reg_base = grf;
>  
> +	if (of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val)) {
> +		dev_info(dev,
> +			"Missing drive-impedance-ohm property in node %s "
> +			"Falling back to 50 Ohm.\n",
> +			dev->of_node->name);
> +		rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
> +	} else {
> +		rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
> +	}
> +
>  	generic_phy = devm_phy_create(dev, dev->of_node, &ops);
>  	if (IS_ERR(generic_phy)) {
>  		dev_err(dev, "failed to create PHY\n");
>