[PATCH v3 1/2] extcon-intel-cht-wc: Make charger detection co-existed with OTG host mode
From: Yauhen Kharuzhy
Date: Sun Mar 03 2019 - 15:16:51 EST
Whiskey Cove Cherry Trail PMIC requires disabling OTG host mode before
of charger detection procedure. Do this by manipulationg of CHGRCTRL1
register.
Source: APCI DSDT code of Lenovo Yoga Book YB1-X91L and open-sourced
Intel's drivers.
Signed-off-by: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/extcon/extcon-intel-cht-wc.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 5ef215297101..8d20e913536f 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -29,7 +29,15 @@
#define CHT_WC_CHGRCTRL0_DBPOFF BIT(6)
#define CHT_WC_CHGRCTRL0_CHR_WDT_NOKICK BIT(7)
-#define CHT_WC_CHGRCTRL1 0x5e17
+#define CHT_WC_CHGRCTRL1 0x5e17
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_100 BIT(0)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_150 BIT(1)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_500 BIT(2)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_900 BIT(3)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_1500 BIT(4)
+#define CHT_WC_CHGRCTRL1_FTEMP_EVENT BIT(5)
+#define CHT_WC_CHGRCTRL1_OTGMODE BIT(6)
+#define CHT_WC_CHGRCTRL1_DBPEN BIT(7)
#define CHT_WC_USBSRC 0x5e29
#define CHT_WC_USBSRC_STS_MASK GENMASK(1, 0)
@@ -198,6 +206,18 @@ static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);
}
+static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext,
+ bool enable)
+{
+ unsigned int val = enable ? CHT_WC_CHGRCTRL1_OTGMODE : 0;
+ int ret;
+
+ ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL1,
+ CHT_WC_CHGRCTRL1_OTGMODE, val);
+ if (ret)
+ dev_err(ext->dev, "Error updating CHGRCTRL1 reg: %d\n", ret);
+}
+
/* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */
static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext,
unsigned int cable, bool state)
@@ -222,10 +242,14 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
if (id == USB_ID_GND) {
+ cht_wc_extcon_set_otgmode(ext, true);
+
/* The 5v boost causes a false VBUS / SDP detect, skip */
goto charger_det_done;
}
+ cht_wc_extcon_set_otgmode(ext, false);
+
/* Plugged into a host/charger or not connected? */
if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) {
/* Route D+ and D- to PMIC for future charger detection */
--
2.20.1