Re: [PATCH v4 00/10] Add basic support for Socionext Milbeaut M10V SoC

[Sugaya, Taichi]

Hi,

On 2019/03/01 23:34, Arnd Bergmann wrote:
> On Wed, Feb 27, 2019 at 5:51 AM Sugaya Taichi
> <sugaya.taichi@xxxxxxxxxxxxx> wrote:
> > Hi,
> >
> > Here is the series of patches the initial support for SC2000(M10V) of
> > Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in
> > source code.
> >
> > SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
> > computer vision. It also features advanced functionalities such as 360-degree,
> > real-time spherical stitching with multi cameras, image stabilization for
> > without mechanical gimbals, and rolling shutter correction. More detail is
> > below:
> > https://www.socionext.com/en/products/assp/milbeaut/SC2000.html
> >
> > Specifications for developers are below:
> >   - Quad-core 32bit Cortex-A7 on ARMv7-A architecture
> >   - NEON support
> >   - DSP
> >   - GPU
> >   - MAX 3GB DDR3
> >   - Cortex-M0 for power control
> >   - NAND Flash Interface
> >   - SD UHS-I
> >   - SD UHS-II
> >   - SDIO
> >   - USB2.0 HOST / Device
> >   - USB3.0 HOST / Device
> >   - PCI express Gen2
> >   - Ethernet Engine
> >   - I2C
> >   - UART
> >   - SPI
> >   - PWM
> >
> > Support is quite minimal for now, since it only includes timer, clock,
> > pictrl and serial controller drivers, so we can only boot to userspace
> > through initramfs. Support for the other peripherals  will come eventually.
>
> I've merged these all into the arm/newsoc branch now, with the
> exception of the patch that Greg has already taken.
>
> I'll do a little more build testing before that branch will be sent,
> but I expect it will be fine.
>
>       Arnd

Thanks a lot!