[PATCH 4.14 47/52] mmc: tmio: fix access width of Block Count Register

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takeshi Saito <takeshi.saito.xv@xxxxxxxxxxx>

commit 5603731a15ef9ca317c122cc8c959f1dee1798b4 upstream.

In R-Car Gen2 or later, the maximum number of transfer blocks are
changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register
should use iowrite32().

If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this
value will not be cleared. So, SD/MMC card initialization fails.

So, check for the bigger register and use apropriate write. Also, mark
the register as extended on Gen2.

Signed-off-by: Takeshi Saito <takeshi.saito.xv@xxxxxxxxxxx>
[wsa: use max_blk_count in if(), add Gen2, update commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxx
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
[Ulf: Fixed build error]
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/mmc/host/renesas_sdhi_sys_dmac.c |    1 +
 drivers/mmc/host/tmio_mmc.h              |    5 +++++
 drivers/mmc/host/tmio_mmc_core.c         |    6 +++++-
 3 files changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -68,6 +68,7 @@ static const struct renesas_sdhi_of_data
 	.scc_offset	= 0x0300,
 	.taps		= rcar_gen2_scc_taps,
 	.taps_num	= ARRAY_SIZE(rcar_gen2_scc_taps),
+	.max_blk_count  = 0xffffffff,
 };
 
 /* Definitions for sampling clocks */
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -286,6 +286,11 @@ static inline void sd_ctrl_write32_as_16
 	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
 }
 
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
+{
+	iowrite32(val, host->ctl + (addr << host->bus_shift));
+}
+
 static inline void sd_ctrl_write32_rep(struct tmio_mmc_host *host, int addr,
 				       const u32 *buf, int count)
 {
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -46,6 +46,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/mmc/sdio.h>
 #include <linux/scatterlist.h>
+#include <linux/sizes.h>
 #include <linux/spinlock.h>
 #include <linux/swiotlb.h>
 #include <linux/workqueue.h>
@@ -761,7 +762,10 @@ static int tmio_mmc_start_data(struct tm
 
 	/* Set transfer length / blocksize */
 	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
-	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
+	if (host->mmc->max_blk_count >= SZ_64K)
+		sd_ctrl_write32(host, CTL_XFER_BLK_COUNT, data->blocks);
+	else
+		sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
 
 	tmio_mmc_start_dma(host, data);