Re: [PATCH v2 1/3] ARM: dts: armada-38x: add interrupts for watchdog

[Guenter Roeck]

On Wed, Mar 06, 2019 at 09:19:22AM +1300, Chris Packham wrote:
> The first interrupt is for the regular watchdog timeout. Normally the
> RSTOUT line will trigger a reset before this interrupt fires but on
> systems with a non-standard reset it may still trigger.
> 
> The second interrupt is for a timer1 which is used as a pre-timeout for
> the watchdog.
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - new, split out from "watchdog: orion_wdt: use timer1 as a pretimeout"
> 
>  arch/arm/boot/dts/armada-38x.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 929459c42760..fc550c640ca8 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -376,6 +376,8 @@
>  				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
>  				clocks = <&coreclk 2>, <&refclk>;
>  				clock-names = "nbclk", "fixed";
> +				interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> +						      <&gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>;

This will need to be documented, possibly including the use of
interrupts-extended (currently only interrupts is documented in
Documentation/devicetree/bindings/watchdog/marvel.txt).

Also, how would it be handled if the primary interrupt is not specified ?
After all, it is optional.

Thanks,
Guenter