[PATCH 6/8] arm64: dts: qcom: pm8998: add gpio-ranges

From: Brian Masney
Date: Tue Mar 05 2019 - 19:54:10 EST


This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.

This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8998.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 43cb5ea14089..4872f116758d 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -93,6 +93,7 @@
compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
+ gpio-ranges = <&pm8998_gpio 0 0 26>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.20.1