[PATCH v2 03/10] dt-binding: gce: add binding for gce subsys property

[Bibby Hsieh]

cmdq driver provide a function that get the relationship
of sub system number from device node for client.
add specification for #subsys-cells, mediatek,gce-subsys.

Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 812698f..07b2adf 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -26,6 +26,13 @@ Required properties:
 	phandle: Label name of a gce node.
 	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
 		      or 'dt-binding/gce/mt8183-gce.h'.
+#subsys-cells: Should be 2.
+	<&phandle register_base_address subsys_number>
+	phandle: Label name of a gce node.
+	register_base_address: the register base address that client
+			       want to write or read.
+	subsys_number: specify the sub-system id which is corresponding
+		       to the register address.
 
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
@@ -50,6 +57,7 @@ Example:
 		thread-num = CMDQ_THR_MAX_COUNT;
 		#mbox-cells = <3>;
 		#event-cells = <1>;
+		#subsys-cells = <2>;
 	};
 
 Example for a client device:
@@ -58,7 +66,8 @@ Example for a client device:
 		compatible = "mediatek,mt8173-mmsys";
 		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
 			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
-		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
+		mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
+				      <&gce 0x14010000 SUBSYS_1401XXXX>;
 		mediatek,gce-event-names = "rdma0_sof",
 					   "rsz0_sof";
 		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
-- 
1.9.1