Re: [PATCH] spi: at91-usart: Remove duplicated checking for spi->bits_per_word

[Nicolas.Ferre]

On 02/10/2018 at 12:10, Axel Lin wrote:
> This checking is already done in __spi_validate_bits_per_word().
> 
> Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>

Agreed:
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>

(Axel, sorry for the delay)

Best regards,
   Nicolas

> ---
>   drivers/spi/spi-at91-usart.c | 8 +-------
>   1 file changed, 1 insertion(+), 7 deletions(-)
> 
> diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c
> index a924657642fa..519853f14934 100644
> --- a/drivers/spi/spi-at91-usart.c
> +++ b/drivers/spi/spi-at91-usart.c
> @@ -176,12 +176,6 @@ static int at91_usart_spi_setup(struct spi_device *spi)
>   	struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller);
>   	u32 *ausd = spi->controller_state;
>   	unsigned int mr = at91_usart_spi_readl(aus, MR);
> -	u8 bits = spi->bits_per_word;
> -
> -	if (bits != 8) {
> -		dev_dbg(&spi->dev, "Only 8 bits per word are supported\n");
> -		return -EINVAL;
> -	}
>   
>   	if (spi->mode & SPI_CPOL)
>   		mr |= US_MR_CPOL;
> @@ -210,7 +204,7 @@ static int at91_usart_spi_setup(struct spi_device *spi)
>   
>   	dev_dbg(&spi->dev,
>   		"setup: bpw %u mode 0x%x -> mr %d %08x\n",
> -		bits, spi->mode, spi->chip_select, mr);
> +		spi->bits_per_word, spi->mode, spi->chip_select, mr);
>   
>   	return 0;
>   }
> 


-- 
Nicolas Ferre