Srinivas,
I am looking at problem on a laptop machine that suspends to S01x, but
link_management is set to max_performance, because the machine is
connected to a charger.
Given DVLSP must be set before the laptop suspends ["""One of the
requirement for modern x86 system to enter lowest power mode (SLP_S0)
is SATA IP block to be off."""], the machine never reaches S01x.
Does it make sense to change the target_lpm_policy at suspend
(ata_port_suspend()) to min_power and bring it back to the original
value on resume?
Gwendal.
On Mon, Jul 30, 2018 at 10:33 AM Tejun Heo <tj@xxxxxxxxxx> wrote:
On Mon, Jul 30, 2018 at 05:26:45PM +0200, Hans de Goede wrote:
Hi,
On 30-07-18 17:22, Tejun Heo wrote:
On Mon, Jul 30, 2018 at 08:15:47AM -0700, Srinivas Pandruvada wrote:
Hi Tejan,
On Mon, 2018-07-02 at 12:01 -0700, Srinivas Pandruvada wrote:
Some minor fixes to be able to correctly set devslp registerAre you applying this series?
to optimize power.
Srinivas Pandruvada (2):
ata: libahci: Correct setting of DEVSLP register
ata: libahci: Allow reconfigure of DEVSLP register
I was waiting for Hans's reviews. Hans, what do you think?
Ah I missed that this was another series. With the caveat that
I do not really know that much about devslp, both patches
seem sensible to me, so both are:
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Applied 1-2 to libata/for-4.19.
Thanks.
--
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html