Re: [RFC][Patch v9 0/6] KVM: Guest Free Page Hinting

[Nitesh Narayan Lal]

On 3/6/19 1:12 PM, Michael S. Tsirkin wrote:
> On Wed, Mar 06, 2019 at 01:07:50PM -0500, Nitesh Narayan Lal wrote:
>> On 3/6/19 11:09 AM, Michael S. Tsirkin wrote:
>>> On Wed, Mar 06, 2019 at 10:50:42AM -0500, Nitesh Narayan Lal wrote:
>>>> The following patch-set proposes an efficient mechanism for handing freed memory between the guest and the host. It enables the guests with no page cache to rapidly free and reclaims memory to and from the host respectively.
>>>>
>>>> Benefit:
>>>> With this patch-series, in our test-case, executed on a single system and single NUMA node with 15GB memory, we were able to successfully launch 5 guests(each with 5 GB memory) when page hinting was enabled and 3 without it. (Detailed explanation of the test procedure is provided at the bottom under Test - 1).
>>>>
>>>> Changelog in v9:
>>>> 	* Guest free page hinting hook is now invoked after a page has been merged in the buddy.
>>>>         * Free pages only with order FREE_PAGE_HINTING_MIN_ORDER(currently defined as MAX_ORDER - 1) are captured.
>>>> 	* Removed kthread which was earlier used to perform the scanning, isolation & reporting of free pages.
>>>> 	* Pages, captured in the per cpu array are sorted based on the zone numbers. This is to avoid redundancy of acquiring zone locks.
>>>>         * Dynamically allocated space is used to hold the isolated guest free pages.
>>>>         * All the pages are reported asynchronously to the host via virtio driver.
>>>>         * Pages are returned back to the guest buddy free list only when the host response is received.
>>>>
>>>> Pending items:
>>>>         * Make sure that the guest free page hinting's current implementation doesn't break hugepages or device assigned guests.
>>>> 	* Follow up on VIRTIO_BALLOON_F_PAGE_POISON's device side support. (It is currently missing)
>>>>         * Compare reporting free pages via vring with vhost.
>>>>         * Decide between MADV_DONTNEED and MADV_FREE.
>>>> 	* Analyze overall performance impact due to guest free page hinting.
>>>> 	* Come up with proper/traceable error-message/logs.
>>>>
>>>> Tests:
>>>> 1. Use-case - Number of guests we can launch
>>>>
>>>> 	NUMA Nodes = 1 with 15 GB memory
>>>> 	Guest Memory = 5 GB
>>>> 	Number of cores in guest = 1
>>>> 	Workload = test allocation program allocates 4GB memory, touches it via memset and exits.
>>>> 	Procedure =
>>>> 	The first guest is launched and once its console is up, the test allocation program is executed with 4 GB memory request (Due to this the guest occupies almost 4-5 GB of memory in the host in a system without page hinting). Once this program exits at that time another guest is launched in the host and the same process is followed. We continue launching the guests until a guest gets killed due to low memory condition in the host.
>>>>
>>>> 	Results:
>>>> 	Without hinting = 3
>>>> 	With hinting = 5
>>>>
>>>> 2. Hackbench
>>>> 	Guest Memory = 5 GB 
>>>> 	Number of cores = 4
>>>> 	Number of tasks		Time with Hinting	Time without Hinting
>>>> 	4000			19.540			17.818
>>>>
>>> How about memhog btw?
>>> Alex reported:
>>>
>>> 	My testing up till now has consisted of setting up 4 8GB VMs on a system
>>> 	with 32GB of memory and 4GB of swap. To stress the memory on the system I
>>> 	would run "memhog 8G" sequentially on each of the guests and observe how
>>> 	long it took to complete the run. The observed behavior is that on the
>>> 	systems with these patches applied in both the guest and on the host I was
>>> 	able to complete the test with a time of 5 to 7 seconds per guest. On a
>>> 	system without these patches the time ranged from 7 to 49 seconds per
>>> 	guest. I am assuming the variability is due to time being spent writing
>>> 	pages out to disk in order to free up space for the guest.
>>>
>> Here are the results:
>>
>> Procedure: 3 Guests of size 5GB is launched on a single NUMA node with
>> total memory of 15GB and no swap. In each of the guest, memhog is run
>> with 5GB. Post-execution of memhog, Host memory usage is monitored by
>> using Free command.
>>
>> Without Hinting:
>> ÂÂÂ ÂÂÂÂ ÂÂÂ ÂÂÂ Time of executionÂÂÂ Host used memory
>> Guest 1:ÂÂÂ ÂÂÂ 45 secondsÂÂÂ ÂÂÂ ÂÂÂ 5.4 GB
>> Guest 2:ÂÂ ÂÂ Â 45 secondsÂÂÂ ÂÂ ÂÂ Â 10 GB
>> Guest 3:ÂÂÂ ÂÂÂ 1Â minuteÂÂÂ ÂÂ ÂÂ ÂÂÂÂ 15 GB
>>
>> With Hinting:
>> ÂÂÂ ÂÂÂ ÂÂÂ Â Â Time of execution ÂÂÂ Host used memory
>> Guest 1:ÂÂ ÂÂ Â 49 secondsÂÂÂ ÂÂÂ ÂÂÂ 2.4 GB
>> Guest 2:ÂÂ ÂÂ Â 40 secondsÂÂÂ ÂÂ ÂÂ Â 4.3 GB
>> Guest 3:ÂÂÂ ÂÂÂ 50 secondsÂÂÂ ÂÂÂ ÂÂÂ 6.3 GB
> OK so no improvement. OTOH Alex's patches cut time down to 5-7 seconds
> which seems better. Want to try testing Alex's patches for comparison?
>
I realized that the last time I reported the memhog numbers, I didn't
enable the swap due to which the actual benefits of the series were not
shown.
I have re-run the test by including some of the changes suggested by
Alexander and David:
ÂÂÂ * Reduced the size of the per-cpu array to 32 and minimum hinting
threshold to 16.
ÂÂÂ * Reported length of isolated pages along with start pfn, instead of
the order from the guest.
ÂÂÂ * Used the reported length to madvise the entire length of address
instead of a single 4K page.
ÂÂÂ * Replaced MADV_DONTNEED with MADV_FREE.

Setup for the test:
NUMA node:1
Memory: 15GB
Swap: 4GB
Guest memory: 6GB
Number of core: 1

Process: A guest is launched and memhog is run with 6GB. As its
execution is over next guest is launched. Everytime memhog execution
time is monitored.ÂÂÂ
Results:
ÂÂÂ Without Hinting:
ÂÂÂ ÂÂÂÂÂÂÂÂÂÂÂÂ Time of execution
ÂÂÂ Guest1:ÂÂÂ 22s
ÂÂÂ Guest2:ÂÂÂ 24s
ÂÂÂ Guest3: 1m29s

ÂÂÂ With Hinting:
ÂÂÂ ÂÂÂÂÂÂÂÂÂÂÂ Time of execution
ÂÂÂ Guest1:ÂÂÂ 24s
ÂÂÂ Guest2:ÂÂÂ 25s
ÂÂÂ Guest3:ÂÂÂ 28s

When hinting is enabled swap space is not used until memhog with 6GB is
ran in 6th guest.


-- 
Regards
Nitesh

Attachment: signature.asc
Description: OpenPGP digital signature