[PATCH v5 02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960

[Yu Chen]

This patch adds binding documentation to support usb hub and usb
data role switch of Hisilicon HiKey960 Board.

Cc: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Cc: Binghui Wang <wangbinghui@xxxxxxxxxxxxx>
Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
---
v1:
* Fix some format errors as suggested by Sergei.
* Modify gpio description to use gpiod API.
v2:
* Remove information about Hikey.
* Fix gpio description.
* Remove device_type of endpoint.
v3:
* Remove property typec-vbus-enable-val.
* Add description of pinctrl-names.
* Add example for "hisilicon,gpio-hubv1"
* Add flag in gpiod properties.
---
---
 .../bindings/misc/hisilicon-hikey-usb.txt          | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt

diff --git a/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
new file mode 100644
index 000000000000..422e844df719
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
@@ -0,0 +1,52 @@
+Support usb hub and usb data role switch of Hisilicon HiKey960 Board.
+
+-----------------------------
+
+Required properties:
+- compatible: "hisilicon,gpio-hubv1","hisilicon,hikey960-usb"
+- typec-vbus-gpios: gpio to control the vbus of typeC port
+- otg-switch-gpios: gpio to switch DP & DM between the hub and typeC port
+- hub-vdd33-en-gpios: gpio to enable the power of hub
+- pinctrl-names: pin configuration state name ("default")
+- pinctrl-0: pinctrl config
+
+Example
+-----
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,hikey960-usb";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
+
+	hisi_hikey_usb: hisi_hikey_usb {
+		compatible = "hisilicon,gpio-hubv1";
+		typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_LOW>;
+		otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+		hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbhub5734_pmx_func>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch_notify>;
+			};
+		};
+	};
-- 
2.15.0-rc2