Re: [PATCH 1/1] spi: pxa2xx: add driver enabling message

[Mark Brown]

On Mon, Apr 08, 2019 at 05:22:44PM +0200, Flavio Suligoi wrote:
> Add an info message for the PXA2xx device driver start-up,
> with the indication of the transfer mode used (DMA or GPIO).
> 
> This info is useful to individuate the timing when
> the module starts.

Adding this sort of message to every driver is going to make boot far
too noisy, it's one thing if we actually enumerate information about the
physical device but this isn't really that.  There are already prints in
the driver core for when things get probed which can be enabled if
ordering issues need to be debugged.

Attachment: signature.asc
Description: PGP signature