Re: [PATCH v4 0/2] Add support for the Purism Librem5 devkit

[Marco Felsch]

Hi Agnus,

On 19-04-15 16:53, Angus Ainslie (Purism) wrote:
> The Librem5 devkit is based on the imx8mq from NXP. This is a default
> devicetree to boot the board to a command prompt.

You should also provide a patch which adds the devicetree to the yaml
file, see: Documentation/devicetree/bindings/arm/fsl.yaml.

Thanks,
  Marco

> 
> Changes since v3:
> 
> Freshly sorted and pressed nodes.
> Change the backlight to an interpolated scale.
> Dropped i2c2.
> Dropped devkit version number to match debian MR.
> 
> Changes since v2:
> 
> Fixed incorrect phy-supply for the fsl-fec.
> Dropped unused regulator property.
> Fixup Makefile for linux-next.
> 
> Changes since v1:
> 
> Dropped config file.
> Updated the board compatible label.
> Changed node names to follow naming conventions.
> Added a more complete regulator hierachy.
> Removed unused nodes.
> Removed unknown devices.
> Fixed comment style.
> Dropped undocumented properties.
> 
> Angus Ainslie (Purism) (2):
>   arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
>   dt-bindings: Add an entry for Purism SPC
> 
>  .../devicetree/bindings/vendor-prefixes.txt   |   1 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../dts/freescale/imx8mq-librem5-devkit.dts   | 822 ++++++++++++++++++
>  3 files changed, 824 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> 
> -- 
> 2.17.1
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |