Re: [PATCH v4 0/2] Add support for the Purism Librem5 devkit

[Angus Ainslie]

On 2019-04-16 00:58, Marco Felsch wrote:
> Hi Agnus,
>
> On 19-04-15 16:53, Angus Ainslie (Purism) wrote:
> > The Librem5 devkit is based on the imx8mq from NXP. This is a default
> > devicetree to boot the board to a command prompt.
>
> You should also provide a patch which adds the devicetree to the yaml
> file, see: Documentation/devicetree/bindings/arm/fsl.yaml.

Sure, what is that yaml file for ?

Angus

> Thanks,
>   Marco
>
> > Changes since v3:
> >
> > Freshly sorted and pressed nodes.
> > Change the backlight to an interpolated scale.
> > Dropped i2c2.
> > Dropped devkit version number to match debian MR.
> >
> > Changes since v2:
> >
> > Fixed incorrect phy-supply for the fsl-fec.
> > Dropped unused regulator property.
> > Fixup Makefile for linux-next.
> >
> > Changes since v1:
> >
> > Dropped config file.
> > Updated the board compatible label.
> > Changed node names to follow naming conventions.
> > Added a more complete regulator hierachy.
> > Removed unused nodes.
> > Removed unknown devices.
> > Fixed comment style.
> > Dropped undocumented properties.
> >
> > Angus Ainslie (Purism) (2):
> >   arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
> >   dt-bindings: Add an entry for Purism SPC
> >
> >  .../devicetree/bindings/vendor-prefixes.txt   |   1 +
> >  arch/arm64/boot/dts/freescale/Makefile        |   1 +
> >  .../dts/freescale/imx8mq-librem5-devkit.dts   | 822 
> > ++++++++++++++++++
> >  3 files changed, 824 insertions(+)
> >  create mode 100644 
> > arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> >
> > --
> > 2.17.1