Re: endianness swapped

From: Greg Ungerer
Date: Sun Apr 28 2019 - 10:16:01 EST



On 28/4/19 7:21 pm, Arnd Bergmann wrote:
On Sun, Apr 28, 2019 at 10:46 AM Geert Uytterhoeven
<geert@xxxxxxxxxxxxxx> wrote:
On Sat, Apr 27, 2019 at 10:22 PM Angelo Dureghello <angelo@xxxxxxxx> wrote:
On Sat, Apr 27, 2019 at 05:32:22PM +0200, Angelo Dureghello wrote:
as you may know, i am working on mcf5441x.
Sorry for not following carefully all the threads, but from a certain
kernel version (likely 4.19 or near there), seems ioread32be
reads the bytes swapped in endianness (mcf-edma dma driver not working
anymore).

Has there been a change about this in the architecture I/O access ?
How should i proceed now ? Fixing the DMA driver read/write, or what ?

looks like the reason of my ioread32be now swapped is:

https://patchwork.kernel.org/patch/10766673/

Trying to figure out what to do now.

This is commit aecc787c06f4300f ("iomap: Use non-raw io functions for
io{read|write}XXbe"):

--- a/lib/iomap.c
+++ b/lib/iomap.c
@@ -65,8 +65,8 @@ static void bad_io_access(unsigned long port, const
char *access)
#endif

#ifndef mmio_read16be
-#define mmio_read16be(addr) be16_to_cpu(__raw_readw(addr))
-#define mmio_read32be(addr) be32_to_cpu(__raw_readl(addr))
+#define mmio_read16be(addr) swab16(readw(addr))
+#define mmio_read32be(addr) swab32(readl(addr))
#endif

unsigned int ioread8(void __iomem *addr)
@@ -106,8 +106,8 @@ EXPORT_SYMBOL(ioread32be);
#endif

#ifndef mmio_write16be
-#define mmio_write16be(val,port) __raw_writew(be16_to_cpu(val),port)
-#define mmio_write32be(val,port) __raw_writel(be32_to_cpu(val),port)
+#define mmio_write16be(val,port) writew(swab16(val),port)
+#define mmio_write32be(val,port) writel(swab32(val),port)

On big endian, the raw accessors are assumed to be non-swapping,
while non-raw accessors are assumed to be swapping.
The latter is not true for Coldfire internal registers, cfr.
arch/m68k/include/asm/io_no.h:

The raw accessors are always assumed to be non-swapping
in the asm-generic code, while the non-raw ones are assumed to
be little-endian in order for them to work with portable drivers.

We have some other cases of big-endian machines that use
a hardware byteswap on their MMIO buses (iirc some mips
and superh parts), but they then need to swap the __raw_*
accessor data words in software to get back to the normal
behavior, as well as swizzle the address for accesses that are
less than 32 bit wide.

Coldfire makes the behavior of readw()/readl() depend on the
MMIO address, presumably since that was the easiest way to
get drivers working originally, but it breaks the assumption
in the asm-generic code.

Yes, that is right.

There is a number of common hardware modules that Freescale have
used in the ColdFire SoC parts and in their ARM based parts (iMX
families). The ARM parts are pretty much always little endian, and
the ColdFire is always big endian. The hardware registers in those
hardware blocks are always accessed in native endian of the processor.

So the address range checks are to deal with those internal
hardware blocks (i2c, spi, dma, etc), since we know those are
at fixed addresses. That leaves the usual endian swapping in place for
other general (ie external) devices (PCI devices, network chips, etc).


static inline u16 readw(const volatile void __iomem *addr)
{
if (cf_internalio(addr))
return __raw_readw(addr);
return __le16_to_cpu(__raw_readw(addr));
}

Orthogonal to how Coldfire's read[wl]() should be fixed, I find it a bit
questionable to swap data twice on big endian architectures.

I would expect that the compiler is capable of detecting a double
swap and optimize it out. Even if it can't, there are not that many
instances of io{read,write}{16,32}be in the kernel, so the increase
in kernel image size from a double swap should be limited to a
few extra instructions, and the runtime overhead should be
negligible compared to the bus access.

Fortunately we can avoid that by defining our own
mmio_{read,write}{16,32}be()...

Makes sense.

Regards
Greg