RE: [PATCH] clk: imx: add fractional-N pll support to pllv4

[Anson Huang]

Hi, Aisheng

> -----Original Message-----
> From: Aisheng Dong
> Sent: Monday, April 29, 2019 7:36 PM
> To: Anson Huang <anson.huang@xxxxxxx>; mturquette@xxxxxxxxxxxx;
> sboyd@xxxxxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: RE: [PATCH] clk: imx: add fractional-N pll support to pllv4
> 
> > From: Aisheng Dong
> > Sent: Monday, April 29, 2019 7:28 PM
> > Subject: RE: [PATCH] clk: imx: add fractional-N pll support to pllv4
> > > The pllv4 supports fractional-N function, the formula is:
> > >
> > > PLL output freq = input * (mult + num/denom),
> > >
> > > This patch adds fractional-N function support, including clock round
> > > rate, calculate rate and set rate, with this patch, the clock rate
> > > of APLL in clock tree is more accurate than before:
> > >
> 
> BTW, one more question:
> Does B0 chip support fractional for SPLL as this patch affects both APLL and
> SPLL?
> I did not see NUM&DENOM register for SPLL in my doc, not sure if it's latest
> version.

There are NUM&DENOM for both SPLL and APLL in reference manual, my RM is
V2(2.0), published on 12/2017.

Anson.

> 
> Regards
> Dong Aisheng
> 
> > > Without fraction:
> > > apll_pre_sel                      1        1        1    24000000
> > > 0     0  50000
> > >    apll_pre_div                   1        1        2    24000000
> > > 0     0  50000
> > >       apll                        1        1        2   528000000
> > > 0     0  50000
> > >          apll_pfd3                0        0        0   792000000
> > > 0     0  50000
> > >          apll_pfd2                0        0        0   339428571
> > > 0     0  50000
> > >          apll_pfd1                0        0        0   352000000
> > > 0     0  50000
> > >             usdhc0                0        0        0
> > 352000000
> > > 0     0  50000
> > >          apll_pfd0                1        1        1   352000000
> > > 0     0  50000
> > >
> > > With fraction:
> > > apll_pre_sel                      1        1        1    24000000
> > > 0     0  50000
> > >    apll_pre_div                   1        1        2    24000000
> > > 0     0  50000
> > >       apll                        1        1        2   529200000
> > > 0     0  50000
> > >          apll_pfd3                0        0        0   793800000
> > > 0     0  50000
> > >          apll_pfd2                0        0        0   340200000
> > > 0     0  50000
> > >          apll_pfd1                0        0        0   352800000
> > > 0     0  50000
> > >             usdhc0                0        0        0
> > 352800000
> > > 0     0  50000
> > >          apll_pfd0                1        1        1   352800000
> > > 0     0  50000
> > >
> > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > > ---
> > >  drivers/clk/imx/clk-pllv4.c | 68
> > > +++++++++++++++++++++++++++++++++++++++------
> > >  1 file changed, 60 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/clk/imx/clk-pllv4.c
> > > b/drivers/clk/imx/clk-pllv4.c index d38bc9f..4ced5ca 100644
> > > --- a/drivers/clk/imx/clk-pllv4.c
> > > +++ b/drivers/clk/imx/clk-pllv4.c
> > > @@ -64,13 +64,18 @@ static unsigned long
> > > clk_pllv4_recalc_rate(struct clk_hw *hw,
> > >  					   unsigned long parent_rate)
> > >  {
> > >  	struct clk_pllv4 *pll = to_clk_pllv4(hw);
> > > -	u32 div;
> > > +	u32 mult = readl_relaxed(pll->base + PLL_CFG_OFFSET);
> > > +	u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
> > > +	u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
> >
> > Nitpick:
> > We usually don't write code like this.
> > How about separate the assignment from declaration?
> >
> > > +	u64 temp64 = parent_rate;
> > >
> > > -	div = readl_relaxed(pll->base + PLL_CFG_OFFSET);
> > > -	div &= BM_PLL_MULT;
> > > -	div >>= BP_PLL_MULT;
> > > +	mult &= BM_PLL_MULT;
> > > +	mult >>= BP_PLL_MULT;
> > >
> > > -	return parent_rate * div;
> > > +	temp64 *= mfn;
> > > +	do_div(temp64, mfd);
> > > +
> > > +	return (parent_rate * mult) + (u32)temp64;
> > >  }
> > >
> > >  static long clk_pllv4_round_rate(struct clk_hw *hw, unsigned long
> > > rate, @@
> > > -78,14 +83,47 @@ static long clk_pllv4_round_rate(struct clk_hw *hw,
> > > unsigned long rate,  {
> > >  	unsigned long parent_rate = *prate;
> > >  	unsigned long round_rate, i;
> > > +	bool found = false;
> > > +	u32 mfn, mfd = 1000000;
> > > +	u32 max_mfd = 0x3FFFFFFF;
> >
> > Please keep sort from long to short.
> > And the multi Max_mfd definitions could be move out the function and
> > Defined use macro.
> >
> > > +	u64 temp64;
> > >
> > >  	for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) {
> > >  		round_rate = parent_rate * pllv4_mult_table[i];
> > > -		if (rate >= round_rate)
> > > -			return round_rate;
> > > +		if (rate >= round_rate) {
> > > +			found = true;
> > > +			break;
> > > +		}
> > > +	}
> > > +
> > > +	if (!found) {
> > > +		pr_warn("%s: unable to round rate %lu, parent rate %lu\n",
> > > +			clk_hw_get_name(hw), rate, parent_rate);
> > > +		return 0;
> > >  	}
> > >
> > > -	return round_rate;
> > > +	if (parent_rate <= max_mfd)
> > > +		mfd = parent_rate;
> > > +
> > > +	temp64 = (u64)(rate - round_rate);
> > > +	temp64 *= mfd;
> > > +	do_div(temp64, parent_rate);
> > > +	mfn = temp64;
> > > +
> > > +	/*
> > > +	 * NOTE: The value of numerator must always be configured to be
> > > +	 * less than the value of the denominator. If we can't get a proper
> > > +	 * pair of mfn/mfd, we simply return the round_rate without using
> > > +	 * the frac part.
> > > +	 */
> > > +	if (mfn >= mfd)
> > > +		return round_rate;
> > > +
> > > +	temp64 = (u64)parent_rate;
> > > +	temp64 *= mfn;
> > > +	do_div(temp64, mfd);
> > > +
> > > +	return round_rate + (u32)temp64;
> > >  }
> > >
> > >  static bool clk_pllv4_is_valid_mult(unsigned int mult) @@ -106,17
> > > +144,31 @@ static int clk_pllv4_set_rate(struct clk_hw *hw, unsigned
> > > +long
> > rate,  {
> > >  	struct clk_pllv4 *pll = to_clk_pllv4(hw);
> > >  	u32 val, mult;
> > > +	u32 mfn, mfd = 1000000;
> > > +	u32 max_mfd = 0x3FFFFFFF;
> >
> > Ditto
> >
> > Otherwise:
> > Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx>
> >
> > Regards
> > Dong Aisheng
> >
> > > +	u64 temp64;
> > >
> > >  	mult = rate / parent_rate;
> > >
> > >  	if (!clk_pllv4_is_valid_mult(mult))
> > >  		return -EINVAL;
> > >
> > > +	if (parent_rate <= max_mfd)
> > > +		mfd = parent_rate;
> > > +
> > > +	temp64 = (u64)(rate - mult * parent_rate);
> > > +	temp64 *= mfd;
> > > +	do_div(temp64, parent_rate);
> > > +	mfn = temp64;
> > > +
> > >  	val = readl_relaxed(pll->base + PLL_CFG_OFFSET);
> > >  	val &= ~BM_PLL_MULT;
> > >  	val |= mult << BP_PLL_MULT;
> > >  	writel_relaxed(val, pll->base + PLL_CFG_OFFSET);
> > >
> > > +	writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
> > > +	writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
> > > +
> > >  	return 0;
> > >  }
> > >
> > > --
> > > 2.7.4