Re: [PATCH v2 1/1] usb: typec: tcpci: Clear the fault status register

From: Guenter Roeck
Date: Tue May 07 2019 - 20:50:14 EST


On 5/7/19 5:27 PM, Angus Ainslie (Purism) wrote:
If the fault status register doesn't get cleared then
the ptn5110 interrupt gets stuck on. As the fault register gets
set everytime the ptn5110 powers on the interrupt is always stuck.

Fixes: fault status register stuck

That is not how Fixes: tags are supposed to work. This should probably be

Fixes: 74e656d6b0551 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")

Otherwise

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx>
---
drivers/usb/typec/tcpm/tcpci.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index c1f7073a56de..a5746657b190 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -463,6 +463,17 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
else if (status & TCPC_ALERT_TX_FAILED)
tcpm_pd_transmit_complete(tcpci->port, TCPC_TX_FAILED);
+ if (status & TCPC_ALERT_FAULT) {
+ u16 fault_status;
+
+ tcpci_read16(tcpci, TCPC_FAULT_STATUS, &fault_status);
+
+ dev_warn(tcpci->dev, "FAULT ALERT status 0x%x\n", fault_status);
+
+ /* clear the fault status */
+ tcpci_write16(tcpci, TCPC_FAULT_STATUS, fault_status);
+ }
+
return IRQ_HANDLED;
}
EXPORT_SYMBOL_GPL(tcpci_irq);