Re: [PATCH v5 09/12] Documentation: PCI: convert endpoint/pci-endpoint.txt to reST

From: Mauro Carvalho Chehab
Date: Mon May 13 2019 - 11:03:39 EST

Next message: Rob Herring: "Re: [PATCH v3 04/10] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC"
Previous message: Akinobu Mita: "Re: [PATCH v3 5/7] nvme-pci: add device coredump infrastructure"
In reply to: Changbin Du: "[PATCH v5 09/12] Documentation: PCI: convert endpoint/pci-endpoint.txt to reST"
Next in thread: Changbin Du: "Re: [PATCH v5 09/12] Documentation: PCI: convert endpoint/pci-endpoint.txt to reST"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Em Mon, 13 May 2019 22:19:57 +0800
Changbin Du <changbin.du@xxxxxxxxx> escreveu:

> This converts the plain text documentation to reStructuredText format and
> add it to Sphinx TOC tree. No essential content change.
>
> Signed-off-by: Changbin Du <changbin.du@xxxxxxxxx>
> Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> ---
> Documentation/PCI/endpoint/index.rst | 10 ++
> .../{pci-endpoint.txt => pci-endpoint.rst} | 96 +++++++++++--------
> Documentation/PCI/index.rst | 1 +
> 3 files changed, 69 insertions(+), 38 deletions(-)
> create mode 100644 Documentation/PCI/endpoint/index.rst
> rename Documentation/PCI/endpoint/{pci-endpoint.txt => pci-endpoint.rst} (82%)
>
> diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst
> new file mode 100644
> index 000000000000..0db4f2fcd7f0
> --- /dev/null
> +++ b/Documentation/PCI/endpoint/index.rst
> @@ -0,0 +1,10 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================
> +PCI Endpoint Framework
> +======================
> +
> +.. toctree::
> + :maxdepth: 2
> +
> + pci-endpoint
> diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.rst
> similarity index 82%
> rename from Documentation/PCI/endpoint/pci-endpoint.txt
> rename to Documentation/PCI/endpoint/pci-endpoint.rst
> index e86a96b66a6a..693f3a2ad7a4 100644
> --- a/Documentation/PCI/endpoint/pci-endpoint.txt
> +++ b/Documentation/PCI/endpoint/pci-endpoint.rst
> @@ -1,11 +1,17 @@
> - PCI ENDPOINT FRAMEWORK
> - Kishon Vijay Abraham I <kishon@xxxxxx>
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================
> +PCI Endpoint Framework
> +======================

This will create a chapter called: "PCI Endpoint Framework" inside a
section named "PCI Endpoint Framework". This is redundant.

Just remove the title here keeping it only at the index file.

With such change:
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>

> +
> +:Author: Kishon Vijay Abraham I <kishon@xxxxxx>
>
> This document is a guide to use the PCI Endpoint Framework in order to create
> endpoint controller driver, endpoint function driver, and using configfs
> interface to bind the function driver to the controller driver.
>
> -1. Introduction
> +Introduction
> +============
>
> Linux has a comprehensive PCI subsystem to support PCI controllers that
> operates in Root Complex mode. The subsystem has capability to scan PCI bus,
> @@ -19,26 +25,30 @@ add endpoint mode support in Linux. This will help to run Linux in an
> EP system which can have a wide variety of use cases from testing or
> validation, co-processor accelerator, etc.
>
> -2. PCI Endpoint Core
> +PCI Endpoint Core
> +=================
>
> The PCI Endpoint Core layer comprises 3 components: the Endpoint Controller
> library, the Endpoint Function library, and the configfs layer to bind the
> endpoint function with the endpoint controller.
>
> -2.1 PCI Endpoint Controller(EPC) Library
> +PCI Endpoint Controller(EPC) Library
> +------------------------------------
>
> The EPC library provides APIs to be used by the controller that can operate
> in endpoint mode. It also provides APIs to be used by function driver/library
> in order to implement a particular endpoint function.
>
> -2.1.1 APIs for the PCI controller Driver
> +APIs for the PCI controller Driver
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> This section lists the APIs that the PCI Endpoint core provides to be used
> by the PCI controller driver.
>
> -*) devm_pci_epc_create()/pci_epc_create()
> +* devm_pci_epc_create()/pci_epc_create()
>
> The PCI controller driver should implement the following ops:
> +
> * write_header: ops to populate configuration space header
> * set_bar: ops to configure the BAR
> * clear_bar: ops to reset the BAR
> @@ -51,110 +61,116 @@ by the PCI controller driver.
> The PCI controller driver can then create a new EPC device by invoking
> devm_pci_epc_create()/pci_epc_create().
>
> -*) devm_pci_epc_destroy()/pci_epc_destroy()
> +* devm_pci_epc_destroy()/pci_epc_destroy()
>
> The PCI controller driver can destroy the EPC device created by either
> devm_pci_epc_create() or pci_epc_create() using devm_pci_epc_destroy() or
> pci_epc_destroy().
>
> -*) pci_epc_linkup()
> +* pci_epc_linkup()
>
> In order to notify all the function devices that the EPC device to which
> they are linked has established a link with the host, the PCI controller
> driver should invoke pci_epc_linkup().
>
> -*) pci_epc_mem_init()
> +* pci_epc_mem_init()
>
> Initialize the pci_epc_mem structure used for allocating EPC addr space.
>
> -*) pci_epc_mem_exit()
> +* pci_epc_mem_exit()
>
> Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
>
> -2.1.2 APIs for the PCI Endpoint Function Driver
> +
> +APIs for the PCI Endpoint Function Driver
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> This section lists the APIs that the PCI Endpoint core provides to be used
> by the PCI endpoint function driver.
>
> -*) pci_epc_write_header()
> +* pci_epc_write_header()
>
> The PCI endpoint function driver should use pci_epc_write_header() to
> write the standard configuration header to the endpoint controller.
>
> -*) pci_epc_set_bar()
> +* pci_epc_set_bar()
>
> The PCI endpoint function driver should use pci_epc_set_bar() to configure
> the Base Address Register in order for the host to assign PCI addr space.
> Register space of the function driver is usually configured
> using this API.
>
> -*) pci_epc_clear_bar()
> +* pci_epc_clear_bar()
>
> The PCI endpoint function driver should use pci_epc_clear_bar() to reset
> the BAR.
>
> -*) pci_epc_raise_irq()
> +* pci_epc_raise_irq()
>
> The PCI endpoint function driver should use pci_epc_raise_irq() to raise
> Legacy Interrupt, MSI or MSI-X Interrupt.
>
> -*) pci_epc_mem_alloc_addr()
> +* pci_epc_mem_alloc_addr()
>
> The PCI endpoint function driver should use pci_epc_mem_alloc_addr(), to
> allocate memory address from EPC addr space which is required to access
> RC's buffer
>
> -*) pci_epc_mem_free_addr()
> +* pci_epc_mem_free_addr()
>
> The PCI endpoint function driver should use pci_epc_mem_free_addr() to
> free the memory space allocated using pci_epc_mem_alloc_addr().
>
> -2.1.3 Other APIs
> +Other APIs
> +~~~~~~~~~~
>
> There are other APIs provided by the EPC library. These are used for binding
> the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
> using these APIs.
>
> -*) pci_epc_get()
> +* pci_epc_get()
>
> Get a reference to the PCI endpoint controller based on the device name of
> the controller.
>
> -*) pci_epc_put()
> +* pci_epc_put()
>
> Release the reference to the PCI endpoint controller obtained using
> pci_epc_get()
>
> -*) pci_epc_add_epf()
> +* pci_epc_add_epf()
>
> Add a PCI endpoint function to a PCI endpoint controller. A PCIe device
> can have up to 8 functions according to the specification.
>
> -*) pci_epc_remove_epf()
> +* pci_epc_remove_epf()
>
> Remove the PCI endpoint function from PCI endpoint controller.
>
> -*) pci_epc_start()
> +* pci_epc_start()
>
> The PCI endpoint function driver should invoke pci_epc_start() once it
> has configured the endpoint function and wants to start the PCI link.
>
> -*) pci_epc_stop()
> +* pci_epc_stop()
>
> The PCI endpoint function driver should invoke pci_epc_stop() to stop
> the PCI LINK.
>
> -2.2 PCI Endpoint Function(EPF) Library
> +
> +PCI Endpoint Function(EPF) Library
> +----------------------------------
>
> The EPF library provides APIs to be used by the function driver and the EPC
> library to provide endpoint mode functionality.
>
> -2.2.1 APIs for the PCI Endpoint Function Driver
> +APIs for the PCI Endpoint Function Driver
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> This section lists the APIs that the PCI Endpoint core provides to be used
> by the PCI endpoint function driver.
>
> -*) pci_epf_register_driver()
> +* pci_epf_register_driver()
>
> The PCI Endpoint Function driver should implement the following ops:
> * bind: ops to perform when a EPC device has been bound to EPF device
> @@ -166,50 +182,54 @@ by the PCI endpoint function driver.
> The PCI Function driver can then register the PCI EPF driver by using
> pci_epf_register_driver().
>
> -*) pci_epf_unregister_driver()
> +* pci_epf_unregister_driver()
>
> The PCI Function driver can unregister the PCI EPF driver by using
> pci_epf_unregister_driver().
>
> -*) pci_epf_alloc_space()
> +* pci_epf_alloc_space()
>
> The PCI Function driver can allocate space for a particular BAR using
> pci_epf_alloc_space().
>
> -*) pci_epf_free_space()
> +* pci_epf_free_space()
>
> The PCI Function driver can free the allocated space
> (using pci_epf_alloc_space) by invoking pci_epf_free_space().
>
> -2.2.2 APIs for the PCI Endpoint Controller Library
> +APIs for the PCI Endpoint Controller Library
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> This section lists the APIs that the PCI Endpoint core provides to be used
> by the PCI endpoint controller library.
>
> -*) pci_epf_linkup()
> +* pci_epf_linkup()
>
> The PCI endpoint controller library invokes pci_epf_linkup() when the
> EPC device has established the connection to the host.
>
> -2.2.2 Other APIs
> +Other APIs
> +~~~~~~~~~~
> +
> There are other APIs provided by the EPF library. These are used to notify
> the function driver when the EPF device is bound to the EPC device.
> pci-ep-cfs.c can be used as reference for using these APIs.
>
> -*) pci_epf_create()
> +* pci_epf_create()
>
> Create a new PCI EPF device by passing the name of the PCI EPF device.
> This name will be used to bind the the EPF device to a EPF driver.
>
> -*) pci_epf_destroy()
> +* pci_epf_destroy()
>
> Destroy the created PCI EPF device.
>
> -*) pci_epf_bind()
> +* pci_epf_bind()
>
> pci_epf_bind() should be invoked when the EPF device has been bound to
> a EPC device.
>
> -*) pci_epf_unbind()
> +* pci_epf_unbind()
>
> pci_epf_unbind() should be invoked when the binding between EPC device
> and EPF device is lost.
> diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
> index f54b65b1ca5f..f4c6121868c3 100644
> --- a/Documentation/PCI/index.rst
> +++ b/Documentation/PCI/index.rst
> @@ -15,3 +15,4 @@ Linux PCI Bus Subsystem
> acpi-info
> pci-error-recovery
> pcieaer-howto
> + endpoint/index

Thanks,
Mauro

Next message: Rob Herring: "Re: [PATCH v3 04/10] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC"
Previous message: Akinobu Mita: "Re: [PATCH v3 5/7] nvme-pci: add device coredump infrastructure"
In reply to: Changbin Du: "[PATCH v5 09/12] Documentation: PCI: convert endpoint/pci-endpoint.txt to reST"
Next in thread: Changbin Du: "Re: [PATCH v5 09/12] Documentation: PCI: convert endpoint/pci-endpoint.txt to reST"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]