Re: [PATCH v5 09/12] Documentation: PCI: convert endpoint/pci-endpoint.txt to reST

From: Changbin Du
Date: Tue May 14 2019 - 10:37:06 EST

Next message: Mimi Zohar: "Re: [PATCH 1/3 v5] add a new ima hook and policy to measure the cmdline"
Previous message: Haitao Huang: "Re: [PATCH v20 00/28] Intel SGX1 support"
In reply to: Mauro Carvalho Chehab: "Re: [PATCH v5 09/12] Documentation: PCI: convert endpoint/pci-endpoint.txt to reST"
Next in thread: Changbin Du: "[PATCH v5 10/12] Documentation: PCI: convert endpoint/pci-endpoint-cfs.txt to reST"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, May 13, 2019 at 12:01:54PM -0300, Mauro Carvalho Chehab wrote:
> Em Mon, 13 May 2019 22:19:57 +0800
> Changbin Du <changbin.du@xxxxxxxxx> escreveu:
>
> > This converts the plain text documentation to reStructuredText format and
> > add it to Sphinx TOC tree. No essential content change.
> >
> > Signed-off-by: Changbin Du <changbin.du@xxxxxxxxx>
> > Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > ---
> > Documentation/PCI/endpoint/index.rst | 10 ++
> > .../{pci-endpoint.txt => pci-endpoint.rst} | 96 +++++++++++--------
> > Documentation/PCI/index.rst | 1 +
> > 3 files changed, 69 insertions(+), 38 deletions(-)
> > create mode 100644 Documentation/PCI/endpoint/index.rst
> > rename Documentation/PCI/endpoint/{pci-endpoint.txt => pci-endpoint.rst} (82%)
> >
> > diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst
> > new file mode 100644
> > index 000000000000..0db4f2fcd7f0
> > --- /dev/null
> > +++ b/Documentation/PCI/endpoint/index.rst
> > @@ -0,0 +1,10 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +======================
> > +PCI Endpoint Framework
> > +======================
> > +
> > +.. toctree::
> > + :maxdepth: 2
> > +
> > + pci-endpoint
> > diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.rst
> > similarity index 82%
> > rename from Documentation/PCI/endpoint/pci-endpoint.txt
> > rename to Documentation/PCI/endpoint/pci-endpoint.rst
> > index e86a96b66a6a..693f3a2ad7a4 100644
> > --- a/Documentation/PCI/endpoint/pci-endpoint.txt
> > +++ b/Documentation/PCI/endpoint/pci-endpoint.rst
> > @@ -1,11 +1,17 @@
> > - PCI ENDPOINT FRAMEWORK
> > - Kishon Vijay Abraham I <kishon@xxxxxx>
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +======================
> > +PCI Endpoint Framework
> > +======================
>
> This will create a chapter called: "PCI Endpoint Framework" inside a
> section named "PCI Endpoint Framework". This is redundant.
>
> Just remove the title here keeping it only at the index file.
>
> With such change:
> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
>
Removed now. Thanks.

> > +
> > +:Author: Kishon Vijay Abraham I <kishon@xxxxxx>
> >
> > This document is a guide to use the PCI Endpoint Framework in order to create
> > endpoint controller driver, endpoint function driver, and using configfs
> > interface to bind the function driver to the controller driver.
> >
> > -1. Introduction
> > +Introduction
> > +============
> >
> > Linux has a comprehensive PCI subsystem to support PCI controllers that
> > operates in Root Complex mode. The subsystem has capability to scan PCI bus,
> > @@ -19,26 +25,30 @@ add endpoint mode support in Linux. This will help to run Linux in an
> > EP system which can have a wide variety of use cases from testing or
> > validation, co-processor accelerator, etc.
> >
> > -2. PCI Endpoint Core
> > +PCI Endpoint Core
> > +=================
> >
> > The PCI Endpoint Core layer comprises 3 components: the Endpoint Controller
> > library, the Endpoint Function library, and the configfs layer to bind the
> > endpoint function with the endpoint controller.
> >
> > -2.1 PCI Endpoint Controller(EPC) Library
> > +PCI Endpoint Controller(EPC) Library
> > +------------------------------------
> >
> > The EPC library provides APIs to be used by the controller that can operate
> > in endpoint mode. It also provides APIs to be used by function driver/library
> > in order to implement a particular endpoint function.
> >
> > -2.1.1 APIs for the PCI controller Driver
> > +APIs for the PCI controller Driver
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This section lists the APIs that the PCI Endpoint core provides to be used
> > by the PCI controller driver.
> >
> > -*) devm_pci_epc_create()/pci_epc_create()
> > +* devm_pci_epc_create()/pci_epc_create()
> >
> > The PCI controller driver should implement the following ops:
> > +
> > * write_header: ops to populate configuration space header
> > * set_bar: ops to configure the BAR
> > * clear_bar: ops to reset the BAR
> > @@ -51,110 +61,116 @@ by the PCI controller driver.
> > The PCI controller driver can then create a new EPC device by invoking
> > devm_pci_epc_create()/pci_epc_create().
> >
> > -*) devm_pci_epc_destroy()/pci_epc_destroy()
> > +* devm_pci_epc_destroy()/pci_epc_destroy()
> >
> > The PCI controller driver can destroy the EPC device created by either
> > devm_pci_epc_create() or pci_epc_create() using devm_pci_epc_destroy() or
> > pci_epc_destroy().
> >
> > -*) pci_epc_linkup()
> > +* pci_epc_linkup()
> >
> > In order to notify all the function devices that the EPC device to which
> > they are linked has established a link with the host, the PCI controller
> > driver should invoke pci_epc_linkup().
> >
> > -*) pci_epc_mem_init()
> > +* pci_epc_mem_init()
> >
> > Initialize the pci_epc_mem structure used for allocating EPC addr space.
> >
> > -*) pci_epc_mem_exit()
> > +* pci_epc_mem_exit()
> >
> > Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
> >
> > -2.1.2 APIs for the PCI Endpoint Function Driver
> > +
> > +APIs for the PCI Endpoint Function Driver
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This section lists the APIs that the PCI Endpoint core provides to be used
> > by the PCI endpoint function driver.
> >
> > -*) pci_epc_write_header()
> > +* pci_epc_write_header()
> >
> > The PCI endpoint function driver should use pci_epc_write_header() to
> > write the standard configuration header to the endpoint controller.
> >
> > -*) pci_epc_set_bar()
> > +* pci_epc_set_bar()
> >
> > The PCI endpoint function driver should use pci_epc_set_bar() to configure
> > the Base Address Register in order for the host to assign PCI addr space.
> > Register space of the function driver is usually configured
> > using this API.
> >
> > -*) pci_epc_clear_bar()
> > +* pci_epc_clear_bar()
> >
> > The PCI endpoint function driver should use pci_epc_clear_bar() to reset
> > the BAR.
> >
> > -*) pci_epc_raise_irq()
> > +* pci_epc_raise_irq()
> >
> > The PCI endpoint function driver should use pci_epc_raise_irq() to raise
> > Legacy Interrupt, MSI or MSI-X Interrupt.
> >
> > -*) pci_epc_mem_alloc_addr()
> > +* pci_epc_mem_alloc_addr()
> >
> > The PCI endpoint function driver should use pci_epc_mem_alloc_addr(), to
> > allocate memory address from EPC addr space which is required to access
> > RC's buffer
> >
> > -*) pci_epc_mem_free_addr()
> > +* pci_epc_mem_free_addr()
> >
> > The PCI endpoint function driver should use pci_epc_mem_free_addr() to
> > free the memory space allocated using pci_epc_mem_alloc_addr().
> >
> > -2.1.3 Other APIs
> > +Other APIs
> > +~~~~~~~~~~
> >
> > There are other APIs provided by the EPC library. These are used for binding
> > the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
> > using these APIs.
> >
> > -*) pci_epc_get()
> > +* pci_epc_get()
> >
> > Get a reference to the PCI endpoint controller based on the device name of
> > the controller.
> >
> > -*) pci_epc_put()
> > +* pci_epc_put()
> >
> > Release the reference to the PCI endpoint controller obtained using
> > pci_epc_get()
> >
> > -*) pci_epc_add_epf()
> > +* pci_epc_add_epf()
> >
> > Add a PCI endpoint function to a PCI endpoint controller. A PCIe device
> > can have up to 8 functions according to the specification.
> >
> > -*) pci_epc_remove_epf()
> > +* pci_epc_remove_epf()
> >
> > Remove the PCI endpoint function from PCI endpoint controller.
> >
> > -*) pci_epc_start()
> > +* pci_epc_start()
> >
> > The PCI endpoint function driver should invoke pci_epc_start() once it
> > has configured the endpoint function and wants to start the PCI link.
> >
> > -*) pci_epc_stop()
> > +* pci_epc_stop()
> >
> > The PCI endpoint function driver should invoke pci_epc_stop() to stop
> > the PCI LINK.
> >
> > -2.2 PCI Endpoint Function(EPF) Library
> > +
> > +PCI Endpoint Function(EPF) Library
> > +----------------------------------
> >
> > The EPF library provides APIs to be used by the function driver and the EPC
> > library to provide endpoint mode functionality.
> >
> > -2.2.1 APIs for the PCI Endpoint Function Driver
> > +APIs for the PCI Endpoint Function Driver
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This section lists the APIs that the PCI Endpoint core provides to be used
> > by the PCI endpoint function driver.
> >
> > -*) pci_epf_register_driver()
> > +* pci_epf_register_driver()
> >
> > The PCI Endpoint Function driver should implement the following ops:
> > * bind: ops to perform when a EPC device has been bound to EPF device
> > @@ -166,50 +182,54 @@ by the PCI endpoint function driver.
> > The PCI Function driver can then register the PCI EPF driver by using
> > pci_epf_register_driver().
> >
> > -*) pci_epf_unregister_driver()
> > +* pci_epf_unregister_driver()
> >
> > The PCI Function driver can unregister the PCI EPF driver by using
> > pci_epf_unregister_driver().
> >
> > -*) pci_epf_alloc_space()
> > +* pci_epf_alloc_space()
> >
> > The PCI Function driver can allocate space for a particular BAR using
> > pci_epf_alloc_space().
> >
> > -*) pci_epf_free_space()
> > +* pci_epf_free_space()
> >
> > The PCI Function driver can free the allocated space
> > (using pci_epf_alloc_space) by invoking pci_epf_free_space().
> >
> > -2.2.2 APIs for the PCI Endpoint Controller Library
> > +APIs for the PCI Endpoint Controller Library
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > +
> > This section lists the APIs that the PCI Endpoint core provides to be used
> > by the PCI endpoint controller library.
> >
> > -*) pci_epf_linkup()
> > +* pci_epf_linkup()
> >
> > The PCI endpoint controller library invokes pci_epf_linkup() when the
> > EPC device has established the connection to the host.
> >
> > -2.2.2 Other APIs
> > +Other APIs
> > +~~~~~~~~~~
> > +
> > There are other APIs provided by the EPF library. These are used to notify
> > the function driver when the EPF device is bound to the EPC device.
> > pci-ep-cfs.c can be used as reference for using these APIs.
> >
> > -*) pci_epf_create()
> > +* pci_epf_create()
> >
> > Create a new PCI EPF device by passing the name of the PCI EPF device.
> > This name will be used to bind the the EPF device to a EPF driver.
> >
> > -*) pci_epf_destroy()
> > +* pci_epf_destroy()
> >
> > Destroy the created PCI EPF device.
> >
> > -*) pci_epf_bind()
> > +* pci_epf_bind()
> >
> > pci_epf_bind() should be invoked when the EPF device has been bound to
> > a EPC device.
> >
> > -*) pci_epf_unbind()
> > +* pci_epf_unbind()
> >
> > pci_epf_unbind() should be invoked when the binding between EPC device
> > and EPF device is lost.
> > diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
> > index f54b65b1ca5f..f4c6121868c3 100644
> > --- a/Documentation/PCI/index.rst
> > +++ b/Documentation/PCI/index.rst
> > @@ -15,3 +15,4 @@ Linux PCI Bus Subsystem
> > acpi-info
> > pci-error-recovery
> > pcieaer-howto
> > + endpoint/index
>
>
>
> Thanks,
> Mauro

--
Cheers,
Changbin Du

Next message: Mimi Zohar: "Re: [PATCH 1/3 v5] add a new ima hook and policy to measure the cmdline"
Previous message: Haitao Huang: "Re: [PATCH v20 00/28] Intel SGX1 support"
In reply to: Mauro Carvalho Chehab: "Re: [PATCH v5 09/12] Documentation: PCI: convert endpoint/pci-endpoint.txt to reST"
Next in thread: Changbin Du: "[PATCH v5 10/12] Documentation: PCI: convert endpoint/pci-endpoint-cfs.txt to reST"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]