Re: [PATCH v2 6/9] dt-bindings: i2c: at91: add binding for enable-ana-filt

[Peter Rosin]

On 2019-06-25 10:05, Eugen.Hristev@xxxxxxxxxxxxx wrote:
> From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
> 
> Add binding specification for analogic filter inside the i2c controller

s/analogic/the analog/

> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-at91.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> index 8268595..20d334c 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> @@ -23,6 +23,9 @@ Optional properties:
>  - enable-dig-filt: Enable the built-in digital filter on the i2c lines,
>    specifically required depending on the hardware PCB/board and if the
>    version of the controller includes it.
> +- enable-ana-filt: Enable the built-in analogic filter on the i2c lines,
> +  specifically required depending on the hardware PCB/board and if the
> +  version of the controller includes it.
>  - Child nodes conforming to i2c bus binding
>  
>  Examples :
> @@ -60,6 +63,7 @@ i2c0: i2c@f8034600 {
>  	atmel,fifo-size = <16>;
>  	i2c-sda-hold-time-ns = <336>;
>  	enable-dig-filt;
> +	enable-ana-filt;

Perhaps

	microchip,digital-filter;
	microchip,analog-filter;

?

Cheers,
Peter

>  
>  	wm8731: wm8731@1a {
>  		compatible = "wm8731";
>