Re: [PATCH v2 6/9] dt-bindings: i2c: at91: add binding for enable-ana-filt

[Eugen.Hristev]

On 25.06.2019 11:55, Peter Rosin wrote:

> 
> On 2019-06-25 10:05, Eugen.Hristev@xxxxxxxxxxxxx wrote:
>> From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>>
>> Add binding specification for analogic filter inside the i2c controller
> 
> s/analogic/the analog/
> 
>> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>> ---
>>   Documentation/devicetree/bindings/i2c/i2c-at91.txt | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
>> index 8268595..20d334c 100644
>> --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
>> +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
>> @@ -23,6 +23,9 @@ Optional properties:
>>   - enable-dig-filt: Enable the built-in digital filter on the i2c lines,
>>     specifically required depending on the hardware PCB/board and if the
>>     version of the controller includes it.
>> +- enable-ana-filt: Enable the built-in analogic filter on the i2c lines,
>> +  specifically required depending on the hardware PCB/board and if the
>> +  version of the controller includes it.
>>   - Child nodes conforming to i2c bus binding
>>   
>>   Examples :
>> @@ -60,6 +63,7 @@ i2c0: i2c@f8034600 {
>>   	atmel,fifo-size = <16>;
>>   	i2c-sda-hold-time-ns = <336>;
>>   	enable-dig-filt;
>> +	enable-ana-filt;
> 
> Perhaps
> 
> 	microchip,digital-filter;
> 	microchip,analog-filter;
> 
> ?

Hi Peter,

Thanks for reviewing. The name of the property does not matter much to 
me, and we have properties prefixed with vendor, and some are not.

@Alexandre Belloni: which name you think it's best ?

Eugen

> 
> Cheers,
> Peter
> 
>>   
>>   	wm8731: wm8731@1a {
>>   		compatible = "wm8731";
>>
>