Re: [PATCH] arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC

From: Heiko Stuebner
Date: Sat Aug 03 2019 - 20:34:37 EST

Next message: Mimi Zohar: "Re: [PATCH] KEYS: trusted: allow module init if TPM is inactive or deactivated"
Previous message: Max Filippov: "[PULL 0/1] xtensa fixes for v5.3"
In reply to: Andy Yan: "[PATCH] arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
Next in thread: Heiko Stuebner: "Re: [PATCH] arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Andy,

Am Samstag, 3. August 2019, 13:46:12 CEST schrieb Andy Yan:
> Leez P710 is a RK3399 based SBC, designed by Leez team
> from lenovo [0].
>
> Specification
> - Rockchip RK3399
> - 4/2GB LPDDR4
> - TF sd scard slot
> - eMMC
> - M.2 B-Key for 4G LTE
> - AP6256 for WiFi + BT
> - Gigabit ethernet
> - HDMI out
> - 40 pin header
> - TYPE-C Power supply
>
> [0] https://leez.lenovo.com
>
> Signed-off-by: Andy Yan <andyshrk@xxxxxxxxx>
> ---
> .../devicetree/bindings/arm/rockchip.yaml | 5 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399-leez-p710.dts | 635 ++++++++++++++++++
> 3 files changed, 641 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 34865042f4e4..da9cd947abfa 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -329,6 +329,11 @@ properties:
> - khadas,edge-v
> - const: rockchip,rk3399
>
> + - description: Leez RK3399 P710
> + items:
> + - const: leez,p710

Is "leez" really the vendor?
Part of me would assume something like
lenovo,leez-p710

So please clarify :-)
And also please make sure the decided vendor is part of the vendor-prefixes
binding in Documentation/devicestree/bindings/vendor-prefixes.yaml

> + - const: rockchip,rk3399
> +
> - description: mqmaker MiQi
> items:
> - const: mqmaker,miqi
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index daa2c78e22c3..1f18a9392d15 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
> new file mode 100644
> index 000000000000..b342f5e8692b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
> @@ -0,0 +1,635 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Andy Yan <andy.yan@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + model = "Leez RK3399 P710";
> + compatible = "leez,p710", "rockchip,rk3399";

same comment as above, so maybe:
model = "Lenovo Leez RK3399 P710";
compatible = "lenovo,leez-p710", "rockchip,rk3399";

> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_enable_h>;
> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> + };
> +
> + dc5v_adp: dc-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "dc5v_adapter";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + vcc5v0_sys: vcc-sys {

vcc5v0_sys: vcc5v0-sys ?

> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&dc5v_adp>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + vcc5v0_host: vcc5v0-host-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_host_en>;
> + regulator-name = "vcc5v0_host";
> + regulator-always-on;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + vcc_lan: vcc3v3-phy-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_lan";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };

In general, please model an actual regulator-tree and do not copy the
unspecific Rockchip vendor tree. These unconnected regulators are a very
good indicator that the real power-tree got ignored (missing vin-supply here)

I found schematics on https://github.com/leezsbc/resources/wiki/Leez-P710:
éæ: https://pan.baidu.com/s/1NPWbuI5csT4zftKUCnRs7g
æåç: rvrh

and there the power-tree is described in a complete way.

regulator/regulator_summaray in the kernels debugfs should
show a nice tree structure starting from the dc-adapter input.

Also please use names matching the supply names from the schematics.

Same for pinctrl names, please use names as used in the board schematics.

> + vdd_log: vdd-log {
> + compatible = "pwm-regulator";
> + pwms = <&pwm2 0 25000 1>;
> + regulator-name = "vdd_log";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clocks = <&cru SCLK_RMII_SRC>;
> + assigned-clock-parents = <&clkin_gmac>;
> + clock_in_out = "input";
> + phy-supply = <&vcc_lan>;
> + phy-mode = "rgmii";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + tx_delay = <0x28>;
> + rx_delay = <0x11>;
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c3>;

can this also use the internal i2c inside the dw-hdmi?

> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_cec>;
> + status = "okay";
> +};
> +
> +&hdmi_sound {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <168>;
> + i2c-scl-falling-time-ns = <4>;
> + status = "okay";
> +
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc6-supply = <&vcc5v0_sys>;
> + vcc7-supply = <&vcc5v0_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> + vcc10-supply = <&vcc5v0_sys>;
> + vcc11-supply = <&vcc5v0_sys>;
> + vcc12-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcc_1v8>;
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-name = "vdd_center";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-name = "vdd_cpu_l";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG4 {
> + regulator-name = "vcc_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc1v8_dvp: LDO_REG1 {
> + regulator-name = "vcc1v8_dvp";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc1v8_hdmi: LDO_REG2 {
> + regulator-name = "vcc1v8_hdmi";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcca_1v8: LDO_REG3 {
> + regulator-name = "vcca_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vccio_sd: LDO_REG4 {
> + regulator-name = "vccio_sd";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcca3v0_codec: LDO_REG5 {
> + regulator-name = "vcca3v0_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-name = "vcc_1v5";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1500000>;
> + };
> + };
> +
> + vcc0v9_hdmi: LDO_REG7 {
> + regulator-name = "vcc0v9_hdmi";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG8 {
> + regulator-name = "vcc_3v0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +

unneeded blank line

> + };
> + };
> +

Heiko

Next message: Mimi Zohar: "Re: [PATCH] KEYS: trusted: allow module init if TPM is inactive or deactivated"
Previous message: Max Filippov: "[PULL 0/1] xtensa fixes for v5.3"
In reply to: Andy Yan: "[PATCH] arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
Next in thread: Heiko Stuebner: "Re: [PATCH] arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]