Re: [PATCH] arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC

[Heiko Stuebner]

Hi Andy,

Am Sonntag, 4. August 2019, 10:38:26 CEST schrieb Andy Yan:
> Heiko Stuebner <heiko@xxxxxxxxx> ä2019å8æ4æåæ äå8:34åéï
> > Am Samstag, 3. August 2019, 13:46:12 CEST schrieb Andy Yan:
> > > Leez P710 is a RK3399 based SBC, designed by Leez team
> > > from lenovo [0].
> > >
> > > Specification
> > > - Rockchip RK3399
> > > - 4/2GB LPDDR4
> > > - TF sd scard slot
> > > - eMMC
> > > - M.2 B-Key for 4G LTE
> > > - AP6256 for WiFi + BT
> > > - Gigabit ethernet
> > > - HDMI out
> > > - 40 pin header
> > > - TYPE-C Power supply
> > >
> > > [0] https://leez.lenovo.com
> > >
> > > Signed-off-by: Andy Yan <andyshrk@xxxxxxxxx>
> > > ---
> > >  .../devicetree/bindings/arm/rockchip.yaml     |   5 +
> > >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> > >  .../boot/dts/rockchip/rk3399-leez-p710.dts    | 635 ++++++++++++++++++
> > >  3 files changed, 641 insertions(+)
> > >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
> > >
> > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml
> > b/Documentation/devicetree/bindings/arm/rockchip.yaml
> > > index 34865042f4e4..da9cd947abfa 100644
> > > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> > > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> > > @@ -329,6 +329,11 @@ properties:
> > >                - khadas,edge-v
> > >            - const: rockchip,rk3399
> > >
> > > +      - description: Leez RK3399 P710
> > > +        items:
> > > +          - const: leez,p710
> >
> > Is "leez" really the vendor?
> > Part of me would assume something like
> >         lenovo,leez-p710
> >
> >
> According to Leez teamï they want to treat Leez an independent vendor hereã

ok, that should be fine then. You'll just have to also add
an entry for them into the vendor-prefixes.yaml file then.

(And of course rework the regulator tree)

Thanks
Heiko

> > So please clarify :-)
> > And also please make sure the decided vendor is part of the vendor-prefixes
> > binding in Documentation/devicestree/bindings/vendor-prefixes.yaml
> >
> > > +          - const: rockchip,rk3399
> > > +
> > >        - description: mqmaker MiQi
> > >          items:
> > >            - const: mqmaker,miqi
> > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile
> > b/arch/arm64/boot/dts/rockchip/Makefile
> > > index daa2c78e22c3..1f18a9392d15 100644
> > > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > > @@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb
> > > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
> > b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
> > > new file mode 100644
> > > index 000000000000..b342f5e8692b
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
> > > @@ -0,0 +1,635 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > +/*
> > > + * Copyright (c) 2019 Andy Yan <andy.yan@xxxxxxxxx>
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include <dt-bindings/input/linux-event-codes.h>
> > > +#include <dt-bindings/pwm/pwm.h>
> > > +#include "rk3399.dtsi"
> > > +#include "rk3399-opp.dtsi"
> > > +
> > > +/ {
> > > +     model = "Leez RK3399 P710";
> > > +     compatible = "leez,p710", "rockchip,rk3399";
> >
> > same comment as above, so maybe:
> >         model = "Lenovo Leez RK3399 P710";
> >         compatible = "lenovo,leez-p710", "rockchip,rk3399";
> >
> >
> >
> > > +
> > > +     chosen {
> > > +             stdout-path = "serial2:1500000n8";
> > > +     };
> > > +
> > > +     clkin_gmac: external-gmac-clock {
> > > +             compatible = "fixed-clock";
> > > +             clock-frequency = <125000000>;
> > > +             clock-output-names = "clkin_gmac";
> > > +             #clock-cells = <0>;
> > > +     };
> > > +
> > > +     sdio_pwrseq: sdio-pwrseq {
> > > +             compatible = "mmc-pwrseq-simple";
> > > +             clocks = <&rk808 1>;
> > > +             clock-names = "ext_clock";
> > > +             pinctrl-names = "default";
> > > +             pinctrl-0 = <&wifi_enable_h>;
> > > +             reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> > > +     };
> > > +
> > > +     dc5v_adp: dc-5v {
> > > +             compatible = "regulator-fixed";
> > > +             regulator-name = "dc5v_adapter";
> > > +             regulator-always-on;
> > > +             regulator-boot-on;
> > > +             regulator-min-microvolt = <5000000>;
> > > +             regulator-max-microvolt = <5000000>;
> > > +     };
> > > +
> > > +     vcc5v0_sys: vcc-sys {
> >
> > vcc5v0_sys: vcc5v0-sys ?
> >
> > > +             compatible = "regulator-fixed";
> > > +             regulator-name = "vcc5v0_sys";
> > > +             regulator-always-on;
> > > +             regulator-boot-on;
> > > +             regulator-min-microvolt = <5000000>;
> > > +             regulator-max-microvolt = <5000000>;
> > > +             vin-supply = <&dc5v_adp>;
> > > +     };
> > > +
> > > +     vcc3v3_sys: vcc3v3-sys {
> > > +             compatible = "regulator-fixed";
> > > +             regulator-name = "vcc3v3_sys";
> > > +             regulator-always-on;
> > > +             regulator-boot-on;
> > > +             regulator-min-microvolt = <3300000>;
> > > +             regulator-max-microvolt = <3300000>;
> > > +             vin-supply = <&vcc5v0_sys>;
> > > +     };
> > > +
> > > +     vcc5v0_host: vcc5v0-host-regulator {
> > > +             compatible = "regulator-fixed";
> > > +             enable-active-high;
> > > +             gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
> > > +             pinctrl-names = "default";
> > > +             pinctrl-0 = <&vcc5v0_host_en>;
> > > +             regulator-name = "vcc5v0_host";
> > > +             regulator-always-on;
> > > +             vin-supply = <&vcc5v0_sys>;
> > > +     };
> > > +
> > > +     vcc_lan: vcc3v3-phy-regulator {
> > > +             compatible = "regulator-fixed";
> > > +             regulator-name = "vcc_lan";
> > > +             regulator-always-on;
> > > +             regulator-boot-on;
> > > +             regulator-min-microvolt = <3300000>;
> > > +             regulator-max-microvolt = <3300000>;
> > > +
> > > +             regulator-state-mem {
> > > +                     regulator-off-in-suspend;
> > > +             };
> > > +     };
> >
> > In general, please model an actual regulator-tree and do not copy the
> > unspecific Rockchip vendor tree. These unconnected regulators are a very
> > good indicator that the real power-tree got ignored (missing vin-supply
> > here)
> >
> > I found schematics on https://github.com/leezsbc/resources/wiki/Leez-P710:
> > éæ: https://pan.baidu.com/s/1NPWbuI5csT4zftKUCnRs7g
> > æåç: rvrh
> >
> > and there the power-tree is described in a complete way.
> >
> > regulator/regulator_summaray in the kernels debugfs should
> > show a nice tree structure starting from the dc-adapter input.
> >
> > Also please use names matching the supply names from the schematics.
> >
> > Same for pinctrl names, please use names as used in the board schematics.
> >
> >
> > > +     vdd_log: vdd-log {
> > > +             compatible = "pwm-regulator";
> > > +             pwms = <&pwm2 0 25000 1>;
> > > +             regulator-name = "vdd_log";
> > > +             regulator-always-on;
> > > +             regulator-boot-on;
> > > +             regulator-min-microvolt = <800000>;
> > > +             regulator-max-microvolt = <1400000>;
> > > +             vin-supply = <&vcc5v0_sys>;
> > > +     };
> > > +};
> > > +
> > > +&cpu_l0 {
> > > +     cpu-supply = <&vdd_cpu_l>;
> > > +};
> > > +
> > > +&cpu_l1 {
> > > +     cpu-supply = <&vdd_cpu_l>;
> > > +};
> > > +
> > > +&cpu_l2 {
> > > +     cpu-supply = <&vdd_cpu_l>;
> > > +};
> > > +
> > > +&cpu_l3 {
> > > +     cpu-supply = <&vdd_cpu_l>;
> > > +};
> > > +
> > > +&cpu_b0 {
> > > +     cpu-supply = <&vdd_cpu_b>;
> > > +};
> > > +
> > > +&cpu_b1 {
> > > +     cpu-supply = <&vdd_cpu_b>;
> > > +};
> > > +
> > > +&emmc_phy {
> > > +     status = "okay";
> > > +};
> > > +
> > > +&gmac {
> > > +     assigned-clocks = <&cru SCLK_RMII_SRC>;
> > > +     assigned-clock-parents = <&clkin_gmac>;
> > > +     clock_in_out = "input";
> > > +     phy-supply = <&vcc_lan>;
> > > +     phy-mode = "rgmii";
> > > +     pinctrl-names = "default";
> > > +     pinctrl-0 = <&rgmii_pins>;
> > > +     snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> > > +     snps,reset-active-low;
> > > +     snps,reset-delays-us = <0 10000 50000>;
> > > +     tx_delay = <0x28>;
> > > +     rx_delay = <0x11>;
> > > +     status = "okay";
> > > +};
> > > +
> > > +&gpu {
> > > +     mali-supply = <&vdd_gpu>;
> > > +     status = "okay";
> > > +};
> > > +
> > > +&hdmi {
> > > +     ddc-i2c-bus = <&i2c3>;
> >
> > can this also use the internal i2c inside the dw-hdmi?
> >
> >
> > > +     pinctrl-names = "default";
> > > +     pinctrl-0 = <&hdmi_cec>;
> > > +     status = "okay";
> > > +};
> > > +
> > > +&hdmi_sound {
> > > +     status = "okay";
> > > +};
> > > +
> > > +&i2c0 {
> > > +     clock-frequency = <400000>;
> > > +     i2c-scl-rising-time-ns = <168>;
> > > +     i2c-scl-falling-time-ns = <4>;
> > > +     status = "okay";
> > > +
> > > +     rk808: pmic@1b {
> > > +             compatible = "rockchip,rk808";
> > > +             reg = <0x1b>;
> > > +             interrupt-parent = <&gpio1>;
> > > +             interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> > > +             #clock-cells = <1>;
> > > +             clock-output-names = "xin32k", "rk808-clkout2";
> > > +             pinctrl-names = "default";
> > > +             pinctrl-0 = <&pmic_int_l>;
> > > +             rockchip,system-power-controller;
> > > +             wakeup-source;
> > > +
> > > +             vcc1-supply = <&vcc5v0_sys>;
> > > +             vcc2-supply = <&vcc5v0_sys>;
> > > +             vcc3-supply = <&vcc5v0_sys>;
> > > +             vcc4-supply = <&vcc5v0_sys>;
> > > +             vcc6-supply = <&vcc5v0_sys>;
> > > +             vcc7-supply = <&vcc5v0_sys>;
> > > +             vcc8-supply = <&vcc3v3_sys>;
> > > +             vcc9-supply = <&vcc5v0_sys>;
> > > +             vcc10-supply = <&vcc5v0_sys>;
> > > +             vcc11-supply = <&vcc5v0_sys>;
> > > +             vcc12-supply = <&vcc3v3_sys>;
> > > +             vddio-supply = <&vcc_1v8>;
> > > +
> > > +             regulators {
> > > +                     vdd_center: DCDC_REG1 {
> > > +                             regulator-name = "vdd_center";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <750000>;
> > > +                             regulator-max-microvolt = <1350000>;
> > > +                             regulator-ramp-delay = <6001>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-off-in-suspend;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vdd_cpu_l: DCDC_REG2 {
> > > +                             regulator-name = "vdd_cpu_l";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <750000>;
> > > +                             regulator-max-microvolt = <1350000>;
> > > +                             regulator-ramp-delay = <6001>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-off-in-suspend;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcc_ddr: DCDC_REG3 {
> > > +                             regulator-name = "vcc_ddr";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-state-mem {
> > > +                                     regulator-on-in-suspend;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcc_1v8: DCDC_REG4 {
> > > +                             regulator-name = "vcc_1v8";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <1800000>;
> > > +                             regulator-max-microvolt = <1800000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-on-in-suspend;
> > > +                                     regulator-suspend-microvolt =
> > <1800000>;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcc1v8_dvp: LDO_REG1 {
> > > +                             regulator-name = "vcc1v8_dvp";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <1800000>;
> > > +                             regulator-max-microvolt = <1800000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-off-in-suspend;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcc1v8_hdmi: LDO_REG2 {
> > > +                             regulator-name = "vcc1v8_hdmi";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <1800000>;
> > > +                             regulator-max-microvolt = <1800000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-off-in-suspend;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcca_1v8: LDO_REG3 {
> > > +                             regulator-name = "vcca_1v8";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <1800000>;
> > > +                             regulator-max-microvolt = <1800000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-on-in-suspend;
> > > +                                     regulator-suspend-microvolt =
> > <1800000>;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vccio_sd: LDO_REG4 {
> > > +                             regulator-name = "vccio_sd";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <3000000>;
> > > +                             regulator-max-microvolt = <3000000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-on-in-suspend;
> > > +                                     regulator-suspend-microvolt =
> > <3000000>;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcca3v0_codec: LDO_REG5 {
> > > +                             regulator-name = "vcca3v0_codec";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <3000000>;
> > > +                             regulator-max-microvolt = <3000000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-off-in-suspend;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcc_1v5: LDO_REG6 {
> > > +                             regulator-name = "vcc_1v5";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <1500000>;
> > > +                             regulator-max-microvolt = <1500000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-on-in-suspend;
> > > +                                     regulator-suspend-microvolt =
> > <1500000>;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcc0v9_hdmi: LDO_REG7 {
> > > +                             regulator-name = "vcc0v9_hdmi";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <900000>;
> > > +                             regulator-max-microvolt = <900000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-off-in-suspend;
> > > +                             };
> > > +                     };
> > > +
> > > +                     vcc_3v0: LDO_REG8 {
> > > +                             regulator-name = "vcc_3v0";
> > > +                             regulator-always-on;
> > > +                             regulator-boot-on;
> > > +                             regulator-min-microvolt = <3000000>;
> > > +                             regulator-max-microvolt = <3000000>;
> > > +                             regulator-state-mem {
> > > +                                     regulator-on-in-suspend;
> > > +                                     regulator-suspend-microvolt =
> > <3000000>;
> > > +                             };
> > > +                     };
> > > +
> >
> > unneeded blank line
> >
> > > +             };
> > > +     };
> > > +
> >
> >
> > Heiko
> >
> >
> >