[PATCH v2 2/2] powerpc/mm: call H_BLOCK_REMOVE when supported

[Laurent Dufour]

Now we do not call _BLOCK_REMOVE all the time when the feature is
exhibited.

Depending on the hardware and the hypervisor, the hcall H_BLOCK_REMOVE may
not be able to process all the page size for a segment base page size, as
reported by the TLB Invalidate Characteristics.o

For each couple base segment page size and actual page size, this
characteristic is telling the size of the block the hcall is supporting.

Due to the involve complexity in do_block_remove() and call_block_remove(),
and the fact currently a 8 size block is returned by the hypervisor,  we
are only supporting 8 size block to the H_BLOCK_REMOVE hcall.

Furthermore a warning message is displayed at boot time in the case of an
unsupported block size.

In order to identify this limitation easily in the code,a local define
HBLKR_SUPPORTED_SIZE defining the currently supported block size, and a
dedicated checking helper is_supported_hlbkr() are introduced.

For regular pages and hugetlb, the assumption is made that the page size is
equal to the base page size. For THP the page size is assumed to be 16M.

Signed-off-by: Laurent Dufour <ldufour@xxxxxxxxxxxxx>
---
 arch/powerpc/platforms/pseries/lpar.c | 35 +++++++++++++++++++++++++--
 1 file changed, 33 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 98a5c2ff9a0b..e2ad9b3b1097 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -65,6 +65,13 @@ EXPORT_SYMBOL(plpar_hcall_norets);
  */
 static int hblkr_size[MMU_PAGE_COUNT][MMU_PAGE_COUNT];
 
+/*
+ * Due to the involved complexity, and that the current hypervisor is only
+ * returning this value or 0, we are limiting the support of the H_BLOCK_REMOVE
+ * buffer size to 8 size block.
+ */
+#define HBLKR_SUPPORTED_BLOCK_SIZE 8
+
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
 static u8 dtl_mask = DTL_LOG_PREEMPT;
 #else
@@ -993,6 +1000,15 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,
 #define HBLKR_CTRL_ERRNOTFOUND	0x8800000000000000UL
 #define HBLKR_CTRL_ERRBUSY	0xa000000000000000UL
 
+/*
+ * Returned true if we are supporting this block size for the specified segment
+ * base page size and actual page size.
+ */
+static inline bool is_supported_hlbkr(int bpsize, int psize)
+{
+	return (hblkr_size[bpsize][psize] == HBLKR_SUPPORTED_BLOCK_SIZE);
+}
+
 /**
  * H_BLOCK_REMOVE caller.
  * @idx should point to the latest @param entry set with a PTEX.
@@ -1152,7 +1168,11 @@ static inline void __pSeries_lpar_hugepage_invalidate(unsigned long *slot,
 	if (lock_tlbie)
 		spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags);
 
-	if (firmware_has_feature(FW_FEATURE_BLOCK_REMOVE))
+	/*
+	 * Assuming THP size is 16M, and we only support 8 bytes size buffer
+	 * for the momment.
+	 */
+	if (is_supported_hlbkr(psize, MMU_PAGE_16M))
 		hugepage_block_invalidate(slot, vpn, count, psize, ssize);
 	else
 		hugepage_bulk_invalidate(slot, vpn, count, psize, ssize);
@@ -1437,6 +1457,14 @@ void __init pseries_lpar_read_hblkr_characteristics(void)
 
 		block_size = 1 << block_size;
 
+		/*
+		 * If the block size is not supported by the kernel, report it,
+		 * but continue reading the values, and the following blocks.
+		 */
+		if (block_size != HBLKR_SUPPORTED_BLOCK_SIZE)
+			pr_warn("Unsupported H_BLOCK_REMOVE block size : %d\n",
+				block_size);
+
 		for (npsize = local_buffer[idx++];  npsize > 0; npsize--)
 			check_lp_set_hblk((unsigned int) local_buffer[idx++],
 					  block_size);
@@ -1468,7 +1496,10 @@ static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
 	if (lock_tlbie)
 		spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags);
 
-	if (firmware_has_feature(FW_FEATURE_BLOCK_REMOVE)) {
+	/*
+	 * Currently, we only support 8 bytes size buffer in do_block_remove().
+	 */
+	if (is_supported_hlbkr(batch->psize, batch->psize)) {
 		do_block_remove(number, batch, param);
 		goto out;
 	}
-- 
2.23.0