[PATCH] regulator: of: fix suspend-min/max-voltage parsing

[Marco Felsch]

Currently the regulator-suspend-min/max-microvolt must be within the
root regulator node but the dt-bindings specifies it as subnode
properties for the regulator-state-[mem/disk/standby] node. The only DT
using this bindings currently is the at91-sama5d2_xplained.dts and this
DT uses it correctly. I don't know if it isn't tested but it can't work
without this fix.

Fixes: f7efad10b5c4 ("regulator: add PM suspend and resume hooks")
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20190917154021.14693-3-m.felsch@xxxxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/regulator/of_regulator.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 9112faa6a9a0..38dd06fbab38 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -231,12 +231,12 @@ static int of_get_regulation_constraints(struct device *dev,
 					"regulator-off-in-suspend"))
 			suspend_state->enabled = DISABLE_IN_SUSPEND;
 
-		if (!of_property_read_u32(np, "regulator-suspend-min-microvolt",
-					  &pval))
+		if (!of_property_read_u32(suspend_np,
+				"regulator-suspend-min-microvolt", &pval))
 			suspend_state->min_uV = pval;
 
-		if (!of_property_read_u32(np, "regulator-suspend-max-microvolt",
-					  &pval))
+		if (!of_property_read_u32(suspend_np,
+				"regulator-suspend-max-microvolt", &pval))
 			suspend_state->max_uV = pval;
 
 		if (!of_property_read_u32(suspend_np,
-- 
2.20.1