Re: [PATCH V3 3/4] clk: imx: imx8mm: fix pll mux bit

[Stephen Boyd]

Quoting Peng Fan (2019-09-08 20:39:44)
> From: Peng Fan <peng.fan@xxxxxxx>
> 
> pll BYPASS bit should be kept inside pll driver for glitchless freq
> setting following spec. If exposing the bit, that means pll driver and
> clk driver has two paths to touch this bit, which is wrong.
> 
> So use EXT_BYPASS bit here.
> 
> And drop uneeded set parent, because EXT_BYPASS default is 0.
> 
> Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
> Suggested-by: Jacky Bai <ping.bai@xxxxxxx>
> Reviewed-by: Leonard Crestez <leonard.crestez@xxxxxxx>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---

Applied to clk-next