Re: [PATCH v5] gpio/mpc8xxx: change irq handler from chained to normal

[Bartosz Golaszewski]

pon., 16 wrz 2019 o 08:08 Hui Song <hui.song_1@xxxxxxx> napisaÅ(a):
>
> From: Song Hui <hui.song_1@xxxxxxx>
>
> More than one gpio controllers can share one interrupt, change the
> driver to request shared irq.
>
> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@xxxxxxx>
> Signed-off-by: Alex Marginean <alexandru.marginean@xxxxxxx>
> Signed-off-by: Song Hui <hui.song_1@xxxxxxx>
> ---
> Changes in v5:
>         - add traverse every bit function.
> Changes in v4:
>         - convert 'pr_err' to 'dev_err'.
> Changes in v3:
>         - update the patch description.
> Changes in v2:
>         - delete the compatible of ls1088a.
>  drivers/gpio/gpio-mpc8xxx.c | 30 +++++++++++++++++++-----------
>  1 file changed, 19 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
> index 16a47de..3a06ca9 100644
> --- a/drivers/gpio/gpio-mpc8xxx.c
> +++ b/drivers/gpio/gpio-mpc8xxx.c
> @@ -22,6 +22,7 @@
>  #include <linux/irq.h>
>  #include <linux/gpio/driver.h>
>  #include <linux/bitops.h>
> +#include <linux/interrupt.h>
>
>  #define MPC8XXX_GPIO_PINS      32
>
> @@ -127,20 +128,20 @@ static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
>                 return -ENXIO;
>  }
>
> -static void mpc8xxx_gpio_irq_cascade(struct irq_desc *desc)
> +static irqreturn_t mpc8xxx_gpio_irq_cascade(int irq, void *data)
>  {
> -       struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
> -       struct irq_chip *chip = irq_desc_get_chip(desc);
> +       struct mpc8xxx_gpio_chip *mpc8xxx_gc = (struct mpc8xxx_gpio_chip *)data;

There's no need to cast void pointers.

>         struct gpio_chip *gc = &mpc8xxx_gc->gc;
>         unsigned int mask;
> +       int i;
>
>         mask = gc->read_reg(mpc8xxx_gc->regs + GPIO_IER)
>                 & gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR);
> -       if (mask)
> +       for_each_set_bit(i, &mask, 32)
>                 generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
> -                                                    32 - ffs(mask)));
> -       if (chip->irq_eoi)
> -               chip->irq_eoi(&desc->irq_data);
> +                                                    31 - i));
> +
> +       return IRQ_HANDLED;
>  }
>
>  static void mpc8xxx_irq_unmask(struct irq_data *d)
> @@ -388,8 +389,8 @@ static int mpc8xxx_probe(struct platform_device *pdev)
>
>         ret = gpiochip_add_data(gc, mpc8xxx_gc);
>         if (ret) {
> -               pr_err("%pOF: GPIO chip registration failed with status %d\n",
> -                      np, ret);
> +               dev_err(&pdev->dev, "%pOF: GPIO chip registration failed with status %d\n",
> +                       np, ret);
>                 goto err;
>         }
>
> @@ -409,8 +410,15 @@ static int mpc8xxx_probe(struct platform_device *pdev)
>         if (devtype->gpio_dir_in_init)
>                 devtype->gpio_dir_in_init(gc);
>
> -       irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
> -                                        mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);
> +       ret = request_irq(mpc8xxx_gc->irqn, mpc8xxx_gpio_irq_cascade,
> +                         IRQF_NO_THREAD | IRQF_SHARED, "gpio-cascade",
> +                         mpc8xxx_gc);

You never free this irq. Maybe use devm_request_irq()?

Bart

> +       if (ret) {
> +               dev_err(&pdev->dev, "%s: failed to request_irq(%d), ret = %d\n",
> +                       np->full_name, mpc8xxx_gc->irqn, ret);
> +               goto err;
> +       }
> +
>         return 0;
>  err:
>         iounmap(mpc8xxx_gc->regs);
> --
> 2.9.5
>