[PATCH v3] bonding: force enable lacp port after link state recovery for 802.3ad

[zhangsha.zhang]

From: Sha Zhang <zhangsha.zhang@xxxxxxxxxx>

After the commit 334031219a84 ("bonding/802.3ad: fix slave link
initialization transition states") merged,
the slave's link status will be changed to BOND_LINK_FAIL
from BOND_LINK_DOWN in the following scenario:
- Driver reports loss of carrier and
  bonding driver receives NETDEV_DOWN notifier
- slave's duplex and speed is zerod and
  its port->is_enabled is cleard to 'false';
- Driver reports link recovery and
  bonding driver receives NETDEV_UP notifier;
- If speed/duplex getting failed here, the link status
  will be changed to BOND_LINK_FAIL;
- The MII monotor later recover the slave's speed/duplex
  and set link status to BOND_LINK_UP, but remains
  the 'port->is_enabled' to 'false'.

In this scenario, the lacp port will not be enabled even its speed
and duplex are valid. The bond will not send LACPDU's, and its
state is 'AD_STATE_DEFAULTED' forever. The simplest fix I think
is to call bond_3ad_handle_link_change() in bond_miimon_commit,
this function can enable lacp after port slave speed check.
As enabled, the lacp port can run its state machine normally
after link recovery.

Signed-off-by: Sha Zhang <zhangsha.zhang@xxxxxxxxxx>
---
 drivers/net/bonding/bond_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 931d9d9..76324a5 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2206,7 +2206,8 @@ static void bond_miimon_commit(struct bonding *bond)
 			 */
 			if (BOND_MODE(bond) == BOND_MODE_8023AD &&
 			    slave->link == BOND_LINK_UP)
-				bond_3ad_adapter_speed_duplex_changed(slave);
+				bond_3ad_handle_link_change(slave,
+							    BOND_LINK_UP);
 			continue;
 
 		case BOND_LINK_UP:
-- 
1.8.3.1