Re: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8

[Tony Lindgren]

* Tero Kristo <t-kristo@xxxxxx> [190917 07:22]:
> On 24/07/2019 09:47, Tony Lindgren wrote:
> > * Suman Anna <s-anna@xxxxxx> [190723 21:02]:
> > > Hi Tony,
> > > 
> > > On 7/23/19 6:28 AM, Tony Lindgren wrote:
> > > > The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7.
> > > > Otherwise we get the following warning on beagle-x15:
> > ...
> > > > @@ -2962,9 +2958,8 @@
> > > >   					<SYSC_IDLE_SMART>;
> > > >   			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
> > > >   			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
> > > > -				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>,
> > > > -				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>;
> > > > -			clock-names = "fck", "ahclkx", "ahclkr";
> > > > +				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
> > > > +			clock-names = "fck", "ahclkx";
> > > 
> > > The equivalent change to MCASP8 is missing.
> > 
> > Thanks for spotting it, probably should be set up the same way as
> > MCASP4 too looking at the TRM.
> > 
> > Tero, care to check the dra7 mcasp clocks we have defined?
> 
> Sorry, missed this earlier.
> 
> > 
> > $ grep MCASP drivers/clk/ti/clk-7xx.c
> >          { DRA7_IPU_MCASP1_CLKCTRL, dra7_mcasp1_bit_data, CLKF_SW_SUP, "ipu-clkctrl:0000:22" },
> >          { DRA7_L4PER2_MCASP2_CLKCTRL, dra7_mcasp2_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0154:22" },
> >          { DRA7_L4PER2_MCASP3_CLKCTRL, dra7_mcasp3_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:015c:22" },
> >          { DRA7_L4PER2_MCASP5_CLKCTRL, dra7_mcasp5_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:016c:22" },
> >          { DRA7_L4PER2_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0184:24" },
> >          { DRA7_L4PER2_MCASP4_CLKCTRL, dra7_mcasp4_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:018c:22" },
> >          { DRA7_L4PER2_MCASP6_CLKCTRL, dra7_mcasp6_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01f8:22" },
> >          { DRA7_L4PER2_MCASP7_CLKCTRL, dra7_mcasp7_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01fc:22" },
> > 
> > Is bit 24 above correct for MCASP8 or should it too be 22 like
> > adjacent MCASP4 in the TRM?
> 
> So yeah, mcasp8 is wrong here, should be 22 as rest of them. I did fix
> mcasp8 clocks partially when doing the conversion but missed the parenting
> here; it was completely broken before.

OK thanks, I'll post a patch to fix that and an updated mcasp dts fix.

Regards,

Tony