[PATCH 5.3 19/21] phy: qcom-qmp: Correct ready status, again
From: Greg Kroah-Hartman
Date: Thu Sep 19 2019 - 18:05:55 EST
From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
commit 14ced7e3a1ae9bed7051df3718c8c7b583854a5c upstream.
Despite extensive testing of commit 885bd765963b ("phy: qcom-qmp: Correct
READY_STATUS poll break condition") I failed to conclude that the
PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as
the PHY gets ready. Similar to the prior bug with UFS the code will
generally get past the check before the transition and thereby
"succeed".
Correct the name of the register used PCIe and USB3 PHYs, replace
mask_pcs_ready with a constant expression depending on the type of the
PHY and check for the appropriate ready state.
Cc: stable@xxxxxxxxxxxxxxx
Cc: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
Cc: Evan Green <evgreen@xxxxxxxxxxxx>
Cc: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
Reported-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition")
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Tested-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 33 ++++++++++++++++-----------------
1 file changed, 16 insertions(+), 17 deletions(-)
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -35,7 +35,7 @@
#define PLL_READY_GATE_EN BIT(3)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
-/* QPHY_COM_PCS_READY_STATUS bit */
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
#define PCS_READY BIT(0)
/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
@@ -115,6 +115,7 @@ enum qphy_reg_layout {
QPHY_SW_RESET,
QPHY_START_CTRL,
QPHY_PCS_READY_STATUS,
+ QPHY_PCS_STATUS,
QPHY_PCS_AUTONOMOUS_MODE_CTRL,
QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
@@ -133,7 +134,7 @@ static const unsigned int pciephy_regs_l
[QPHY_FLL_MAN_CODE] = 0xd4,
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_READY_STATUS] = 0x174,
+ [QPHY_PCS_STATUS] = 0x174,
};
static const unsigned int usb3phy_regs_layout[] = {
@@ -144,7 +145,7 @@ static const unsigned int usb3phy_regs_l
[QPHY_FLL_MAN_CODE] = 0xd0,
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_READY_STATUS] = 0x17c,
+ [QPHY_PCS_STATUS] = 0x17c,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
@@ -153,7 +154,7 @@ static const unsigned int usb3phy_regs_l
static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_READY_STATUS] = 0x174,
+ [QPHY_PCS_STATUS] = 0x174,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
@@ -911,7 +912,6 @@ struct qmp_phy_cfg {
unsigned int start_ctrl;
unsigned int pwrdn_ctrl;
- unsigned int mask_pcs_ready;
unsigned int mask_com_pcs_ready;
/* true, if PHY has a separate PHY_COM control block */
@@ -1074,7 +1074,6 @@ static const struct qmp_phy_cfg msm8996_
.start_ctrl = PCS_START | PLL_READY_GATE_EN,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
- .mask_pcs_ready = PHYSTATUS,
.mask_com_pcs_ready = PCS_READY,
.has_phy_com_ctrl = true,
@@ -1106,7 +1105,6 @@ static const struct qmp_phy_cfg msm8996_
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PHYSTATUS,
};
/* list of resets */
@@ -1136,7 +1134,6 @@ static const struct qmp_phy_cfg ipq8074_
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
- .mask_pcs_ready = PHYSTATUS,
.has_phy_com_ctrl = false,
.has_lane_rst = false,
@@ -1167,7 +1164,6 @@ static const struct qmp_phy_cfg qmp_v3_u
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -1199,7 +1195,6 @@ static const struct qmp_phy_cfg qmp_v3_u
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -1226,7 +1221,6 @@ static const struct qmp_phy_cfg sdm845_u
.start_ctrl = SERDES_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PCS_READY,
.is_dual_lane_phy = true,
.no_pcs_sw_reset = true,
@@ -1254,7 +1248,6 @@ static const struct qmp_phy_cfg msm8998_
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
- .mask_pcs_ready = PHYSTATUS,
};
static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
@@ -1279,7 +1272,6 @@ static const struct qmp_phy_cfg msm8998_
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PHYSTATUS,
.is_dual_lane_phy = true,
};
@@ -1457,7 +1449,7 @@ static int qcom_qmp_phy_enable(struct ph
void __iomem *pcs = qphy->pcs;
void __iomem *dp_com = qmp->dp_com;
void __iomem *status;
- unsigned int mask, val;
+ unsigned int mask, val, ready;
int ret;
dev_vdbg(qmp->dev, "Initializing QMP phy\n");
@@ -1545,10 +1537,17 @@ static int qcom_qmp_phy_enable(struct ph
/* start SerDes and Phy-Coding-Sublayer */
qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
- status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
- mask = cfg->mask_pcs_ready;
+ if (cfg->type == PHY_TYPE_UFS) {
+ status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+ mask = PCS_READY;
+ ready = PCS_READY;
+ } else {
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ mask = PHYSTATUS;
+ ready = 0;
+ }
- ret = readl_poll_timeout(status, val, val & mask, 10,
+ ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
PHY_INIT_COMPLETE_TIMEOUT);
if (ret) {
dev_err(qmp->dev, "phy initialization timed-out\n");