[PATCH v4 13/15] arm64: dts: msm8916: thermal: Add interrupt support

[Amit Kucheria]

Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8686e101905c..c0d0492d90ec 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -176,8 +176,8 @@
 
 	thermal-zones {
 		cpu0_1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -206,8 +206,8 @@
 		};
 
 		cpu2_3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -236,8 +236,8 @@
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -256,8 +256,8 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -271,8 +271,8 @@
 		};
 
 		modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -816,6 +816,8 @@
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 			nvmem-cell-names = "calib", "calib_sel";
 			#qcom,sensors = <5>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1