[PATCH v4 12/15] arm: dts: msm8974: thermal: Add interrupt support
From: Amit Kucheria
Date: Fri Sep 20 2019 - 17:53:37 EST
Register upper-lower interrupt for the tsens controller.
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Tested-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 36 +++++++++++++++--------------
1 file changed, 19 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d32f639505f1..290f7c3827d4 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -139,8 +139,8 @@
thermal-zones {
cpu-thermal0 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 5>;
@@ -159,8 +159,8 @@
};
cpu-thermal1 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 6>;
@@ -179,8 +179,8 @@
};
cpu-thermal2 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 7>;
@@ -199,8 +199,8 @@
};
cpu-thermal3 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 8>;
@@ -219,8 +219,8 @@
};
q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 1>;
@@ -234,8 +234,8 @@
};
modemtx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 2>;
@@ -250,7 +250,7 @@
video-thermal {
polling-delay-passive = <0>;
- polling-delay = <1000>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 3>;
@@ -279,8 +279,8 @@
};
gpu-thermal-top {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 9>;
@@ -294,8 +294,8 @@
};
gpu-thermal-bottom {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens 10>;
@@ -531,6 +531,8 @@
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
#qcom,sensors = <11>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
--
2.17.1