[RFT v4 4/8] ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos4210

[Krzysztof Kozlowski]

Multi Core Timer node has interrupts routed to two different parents -
GIC and combiner.  This was modeled with a interrupt-map within a
subnode but can be expressed in an easier and more common way, directly
in the node itself.

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

---

Not tested.

Changes since v3:
1. Use interrupts-extended instead of interrupts-map.
---
 arch/arm/boot/dts/exynos4210.dtsi | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 6d3f19562aab..5fa33d43821e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -109,23 +109,14 @@
 		mct: timer@10050000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
-
-			mct_map: mct-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map =
-					<0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
-					<1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
-					<5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
-			};
+			interrupts-extended = <&gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
+					      <&combiner 12 6>,
+					      <&combiner 12 7>,
+					      <&gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		watchdog: watchdog@10060000 {
-- 
2.17.1