[PATCH v2 2/3] net: phy: at803x: add ar9331 support

[Oleksij Rempel]

Mostly this hardware can work with generic PHY driver, but this change
is needed to provided interrupt handling support.
Tested with dsa ar9331-switch driver.

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
 drivers/net/phy/at803x.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 7895dbe600ac..42492f83c8d7 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -53,6 +53,7 @@
 #define AT803X_DEBUG_REG_5			0x05
 #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
 
+#define ATH9331_PHY_ID 0x004dd041
 #define ATH8030_PHY_ID 0x004dd076
 #define ATH8031_PHY_ID 0x004dd074
 #define ATH8035_PHY_ID 0x004dd072
@@ -403,6 +404,16 @@ static struct phy_driver at803x_driver[] = {
 	.aneg_done		= at803x_aneg_done,
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
+}, {
+	/* ATHEROS AR9331 */
+	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
+	.name			= "Atheros AR9331 built-in PHY",
+	.config_init		= at803x_config_init,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	/* PHY_BASIC_FEATURES */
+	.ack_interrupt		= &at803x_ack_interrupt,
+	.config_intr		= &at803x_config_intr,
 } };
 
 module_phy_driver(at803x_driver);
-- 
2.23.0